E-Series 140 - Pump ASTRALPOOL - Free user manual and instructions
Find the device manual for free E-Series 140 ASTRALPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pool Pump |
| Brand | AstralPool |
| Model | E-Series 140 |
| Power Rating | 1.0 HP (0.75 kW) |
| Flow Rate | 140 L/min (nominal) |
| Max Head | 10 m (33 ft) |
| Voltage | 230 V ~ 50 Hz |
| Inlet/Outlet Size | 50 mm (2") |
| Protection Class | IPX5 |
| Weight | 14.5 kg (32 lb) |
| Dimensions (L x W x H) | 580 x 240 x 300 mm |
| Noise Level | ≤ 70 dB(A) |
| Self-Priming | Yes, up to 3 m |
| Pre-Filter | Integrated transparent lid with basket |
| Motor Protection | Thermal overload protector |
| Housing Material | Reinforced thermoplastic |
| Cable Length | 1.5 m |
| Operating Temperature | 5°C to 40°C |
| Maintenance | Clean pre-filter basket regularly; lubricate O-rings annually |
| Warranty | 2 years (subject to terms) |
Frequently Asked Questions - E-Series 140 ASTRALPOOL
How do I prime the AstralPool E-Series 140 pump?
Fill the pump housing with water through the priming plug until water overflows. Close the plug and start the pump. If air is trapped, loosen the plug briefly to release air. The pump is self-priming up to 3 meters.
What is the recommended maximum flow rate for this pump?
The nominal flow rate is 140 L/min at medium head. For optimal performance, ensure the plumbing size matches the 2" (50 mm) inlet/outlet.
Can I run the pump dry?
No, running the pump dry can damage the mechanical seal and motor. Always ensure the pump is primed with water before starting.
How often should I clean the pre-filter basket?
Check the pre-filter basket weekly during heavy use. Clean it when debris accumulates to maintain flow. The transparent lid allows easy inspection.
What type of lubricant should I use on the O-rings?
Use a silicone-based lubricant for O-rings. Do not use petroleum-based grease as it can degrade the rubber.
Why is my pump making unusual noise?
Common causes: cavitation due to low water flow, foreign objects in the impeller, or worn bearings. Check the pre-filter and impeller for debris. If noise persists, consult a technician.
What is the maximum operating temperature?
The pump is designed for water temperatures between 5°C and 40°C. Exceeding this range may cause damage to components.
How do I winterize the pump?
Drain all water from the pump housing and pipes. Remove the pre-filter basket and store it dry. Loosen the drain plugs to prevent ice damage. Store the pump in a frost-free location.
Is the pump suitable for saltwater pools?
Yes, the E-Series 140 is compatible with saltwater pools up to 4 g/L (4000 ppm). Regular maintenance of seals is recommended.
Where can I find spare parts?
Spare parts such as seals, impellers, and pre-filter baskets are available through AstralPool dealers or online. Use only genuine parts for safety and performance.
User questions about E-Series 140 ASTRALPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual E-Series 140 - ASTRALPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E-Series 140 by ASTRALPOOL.
USER MANUAL E-Series 140 ASTRALPOOL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASTRALPOOL
Model : E-Series 140
Category : Pump