Viron P320 XT - Pump ASTRALPOOL - Free user manual and instructions
Find the device manual for free Viron P320 XT ASTRALPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pool Pump |
| Model | Viron P320 XT |
| Brand | AstralPool |
| Motor Power | 1.5 HP (1.1 kW) |
| Flow Rate (max) | 320 L/min |
| Voltage | 230 V / 50 Hz |
| Current | 6.5 A |
| Speed Control | Variable speed (3 speeds) |
| Connection Size | 2 inches (50 mm) |
| Max Head | 12 m |
| Protection Class | IP55 |
| Insulation Class | F |
| Thermal Protection | Auto-reset |
| Housing Material | Reinforced thermoplastic |
| Impeller Material | Technopolymer |
| Mechanical Seal | Graphite / Ceramic |
| Water Temperature | 5 °C – 45 °C |
| Noise Level | ≤ 70 dB(A) |
| Dimensions (L x W x H) | 600 x 250 x 300 mm |
| Net Weight | 24 kg |
| Gross Weight | 26 kg |
| Self-Priming | Yes (up to 3 m) |
| Filter Capacity | Strainer basket included |
| Maintenance | Clean strainer monthly; replace seals yearly |
| Safety Features | Overload protection, grounding |
Frequently Asked Questions - Viron P320 XT ASTRALPOOL
What is the power consumption of the Viron P320 XT pump?
The pump has a motor power of 1.5 HP (1.1 kW) and draws approximately 6.5 A at 230 V. Actual power consumption depends on the selected speed setting.
How do I prime the pump?
Ensure the strainer pot is filled with water, close the lid tightly, and turn on the pump. The pump is self-priming up to 3 meters. If air is trapped, open the air relief valve on the filter.
What is the maximum flow rate?
The maximum flow rate is 320 L/min (about 84 GPM) at low head. Actual flow depends on pipe size and system resistance.
Is the pump suitable for saltwater pools?
Yes, the Viron P320 XT is designed to handle chlorinated and saltwater pools. The materials are corrosion-resistant, but we recommend rinsing with fresh water periodically.
What maintenance is required?
Regularly clean the strainer basket (weekly during heavy use). Check the mechanical seal for leaks annually. Lubricate O-rings with silicone grease. Replace seals if worn.
Can I run the pump continuously?
Yes, the pump is designed for continuous operation. However, it is recommended to run it at lower speeds for longer filtration periods to save energy.
What should I do if the pump is noisy?
Check for cavitation (air in the system), ensure the pump is mounted on a solid base, and verify that the impeller is not obstructed. If noise persists, inspect the bearings or motor.
How do I winterize the pump?
Drain all water from the pump and filter. Remove the drain plugs and store the pump in a dry, frost-free place. Protect electrical connections from moisture.
What is the warranty period?
AstralPool offers a 2-year warranty for the Viron P320 XT pump against manufacturing defects. Extended warranty may be available upon registration.
Where can I find replacement parts?
Authorized dealers and online spare parts stores carry impellers, seals, O-rings, and strainer baskets. Use only genuine AstralPool parts to maintain performance and safety.
User questions about Viron P320 XT ASTRALPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual Viron P320 XT - ASTRALPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Viron P320 XT by ASTRALPOOL.
USER MANUAL Viron P320 XT ASTRALPOOL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASTRALPOOL
Model : Viron P320 XT
Category : Pump