MACKIE

XR624 - Loudspeaker MACKIE - Free user manual and instructions

Find the device manual for free XR624 MACKIE in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice MACKIE XR624 - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Passive Loudspeaker
Woofer 12" high-excursion
High-Frequency Driver 1.75" titanium compression driver
Power Handling (RMS) 200 W
Power Handling (Peak) 400 W
Impedance 8 ohms
Frequency Response 65 Hz – 20 kHz (-10 dB)
Sensitivity (1W/1m) 96 dB SPL
Maximum SPL 126 dB peak
Enclosure Type Ported (rear vented)
Input Connectors 2 x Speakon NL4, 1 x 1/4" TS jack
Mounting 35 mm pole mount, 4 x M10 flying points
Dimensions (H x W x D) 45.0 cm x 30.0 cm x 30.0 cm (17.7" x 11.8" x 11.8")
Weight 15.0 kg (33.1 lbs)
Material Plywood with black textured finish
Grille Steel grille with foam backing
Safety Features Speakon connectors lock, flying points rated, rubber feet for stability
Cleaning Wipe with dry cloth, do not use solvents
Included Accessories User manual, Speakon adapter (optional)
Warranty Limited 3-year warranty (depending on region)

Frequently Asked Questions - XR624 MACKIE

How do I properly connect the XR624 to an amplifier?
Use Speakon connectors for secure connection: insert the cable into the NL4 input and twist to lock. For single-amp operation, connect to pins 1+/1- (8 ohms). Do not daisy-chain more than 2 speakers per channel to avoid impedance mismatch.
Can I mount the XR624 on a tripod speaker stand?
Yes, the speaker has a 35 mm pole-mount socket underneath. Place the speaker securely on the stand, ensuring the stand is rated for at least the speaker's weight (15 kg). Use a safety strap for overhead installations.
What is the recommended amplifier power for the XR624?
Amp power should be between 200 W and 400 W RMS at 8 ohms per speaker. Using a slightly more powerful amp (e.g., 300-400 W) provides headroom and reduces distortion, but avoid underpowering as it may cause clipping.
How should I clean and maintain the XR624?
Wipe the enclosure with a soft, dry cloth. For grille cleaning, gently vacuum or use compressed air. Do not use liquid cleaners or solvents, as they may damage the finish or driver components.
What type of cable should I use for best performance?
Use high-quality, 12-14 AWG speaker cable with Speakon connectors. Keep cable runs as short as possible (under 30 meters) to minimize power loss. For long runs, use thicker gauge (10 AWG).
Why is there no sound coming from the speaker?
First, check that the amplifier is powered and connected properly. Ensure the Speakon cable is fully inserted and locked. Test with another cable or speaker to isolate the issue. If still no sound, inspect the driver for damage.
Can I use the XR624 as a floor monitor?
Yes, the trapezoidal shape allows use as a wedge monitor. Place it on its side, ensuring the woofer is oriented correctly. The rubber feet prevent slipping. Note that the off-axis response may vary.
How do I set up the internal crossover if bi-amping?
The XR624 does not include a built-in passive crossover for bi-amping. It is a single-input speaker. For bi-amping, you would need an external electronic crossover and appropriate amplifiers for each driver (not recommended without modification).
What are the flying points rated for?
The four M10 flying points are rated for safe suspension with proper hardware (M10 eyebolts). Each point can support the speaker's weight (15 kg). Always use rated shackles and safety cables, and consult a professional for overhead installations.
Does the XR624 have a subwoofer output?
No, the XR624 is a full-range passive speaker without built-in processing. To use with a subwoofer, connect the subwoofer in parallel via Speakon (daisy chain) if the amp can handle the impedance load. Alternatively, use an active crossover before the amplifier.

User questions about XR624 MACKIE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual XR624 - MACKIE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XR624 by MACKIE.

USER MANUAL XR624 MACKIE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : MACKIE

Model : XR624

Category : Loudspeaker