PRO 60 - Loudspeaker Wet Sounds - Free user manual and instructions
Find the device manual for free PRO 60 Wet Sounds in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Marine Coaxial Loudspeaker |
| Brand | Wet Sounds |
| Model | PRO 60 |
| Speaker Size | 6.5 inches (165 mm) |
| Woofer Cone Material | Polypropylene with UV protection |
| Tweeter Type | 1-inch Titanium Dome |
| Impedance | 4 Ohms |
| Power Handling (RMS) | 100 Watts |
| Power Handling (Peak) | 200 Watts |
| Frequency Response | 45 Hz - 20 kHz |
| Sensitivity | 90 dB @ 1W/1m |
| Mounting Depth | 2.5 inches (63.5 mm) |
| Cutout Diameter | 5.9 inches (150 mm) |
| Weight (per speaker) | 2.5 lbs (1.13 kg) |
| Water Resistance Rating | IPX6 (water resistant) |
| UV Protection | Yes (UV-stabilized materials) |
| Mounting Hardware Included | Yes (stainless steel) |
| Recommended Amplifier Power | 50-150 Watts RMS per channel |
| Maintenance | Wipe with a damp cloth; avoid abrasive cleaners |
| Safety Precautions | Do not exceed rated power; disconnect power before cleaning |
| Repairability | Contact authorized service center for repairs |
| Warranty | 1 year (check local policy) |
Frequently Asked Questions - PRO 60 Wet Sounds
What is the mounting depth of the Wet Sounds PRO 60?
The mounting depth is 2.5 inches (63.5 mm). Ensure sufficient clearance behind the mounting surface.
Can I use the PRO 60 in saltwater environments?
Yes, the PRO 60 features UV-stabilized materials and an IPX6 water resistance rating, making it suitable for marine use including saltwater. Rinse with fresh water after exposure.
What size cutout is needed for the PRO 60?
The required cutout diameter is 5.9 inches (150 mm). Use the included template for precise cutting.
What is the recommended amplifier power for these speakers?
A dedicated amplifier providing 50-150 Watts RMS per channel is recommended to achieve optimal performance without distortion.
Are the PRO 60 speakers compatible with 8-ohm systems?
No, the PRO 60 has a 4-ohm impedance. Using them with an 8-ohm system may reduce power output and affect sound quality. Use a compatible 4-ohm amplifier.
How do I clean the PRO 60 speakers?
Wipe the speaker surface with a soft, damp cloth. Do not use harsh chemicals or abrasive materials. For grime, use mild soapy water and rinse thoroughly.
What type of tweeter is used in the PRO 60?
The PRO 60 features a 1-inch titanium dome tweeter for clear and crisp high-frequency reproduction.
Can I install the PRO 60 in a boat dashboard?
Yes, the PRO 60 is designed for marine applications. Ensure the mounting location is flat and the cutout is clean. Use the included stainless steel hardware for corrosion resistance.
What is the frequency response of the PRO 60?
The frequency response is 45 Hz to 20 kHz, providing a balanced sound with decent bass extension for a 6.5-inch speaker.
Where can I find the user manual for the PRO 60?
The user manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by selecting your language and providing your email.
User questions about PRO 60 Wet Sounds
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PRO 60 - Wet Sounds and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRO 60 by Wet Sounds.
USER MANUAL PRO 60 Wet Sounds
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wet Sounds
Model : PRO 60
Category : Loudspeaker