REV 10 - Loudspeaker Wet Sounds - Free user manual and instructions
Find the device manual for free REV 10 Wet Sounds in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Marine Tower Loudspeaker |
| Model | REV 10 |
| Brand | Wet Sounds |
| Woofer Size | 10 inches |
| Tweeter Size | 1 inch |
| Peak Power Handling | 800 Watts |
| RMS Power Handling | 400 Watts |
| Impedance | 4 Ohms |
| Frequency Response | 50 Hz - 20 kHz |
| Sensitivity | 90 dB |
| Dimensions (H x W x D) | 10.5 x 10.5 x 10.5 inches |
| Weight | 10.5 lbs |
| Power Supply | 12V DC |
| Weatherproof Rating | IPX6 |
| Housing Material | UV-resistant polymer |
| Mounting Type | Clamp-on or flush mount |
| Included Accessories | Mounting hardware, grille, wire terminals |
| Care Instructions | Wipe with damp cloth, avoid harsh chemicals |
| Safety Precautions | Secure mounting, do not exceed power rating |
| Spare Parts Availability | Contact authorized Wet Sounds dealer |
| Repairability | Serviceable by qualified technician |
| Warranty | 2 years limited |
| Manual Languages | English, others via translation service |
Frequently Asked Questions - REV 10 Wet Sounds
What is the power handling of the Wet Sounds REV 10?
The REV 10 has a peak power handling of 800 watts and an RMS rating of 400 watts at 4 ohms.
Is the REV 10 speaker waterproof?
Yes, it is designed for marine use with an IPX6 weatherproof rating, making it resistant to water splashes and UV damage.
How do I install the REV 10 on my boat tower?
The speaker comes with universal mounting hardware for clamp-on installation. Ensure a secure fit and follow the wiring instructions in the manual.
What amplifier should I use with the REV 10?
Wet Sounds recommends using an amplifier that delivers 400 watts RMS per channel at 4 ohms, such as the Wet Sounds HT-6 or similar models.
Can I use the REV 10 in a car or indoor setup?
While primarily designed for marine towers, it can be used in vehicles or indoors if properly mounted and powered. However, it is optimized for outdoor marine environments.
What are the dimensions and weight of the REV 10?
Each speaker measures approximately 10.5 x 10.5 x 10.5 inches and weighs about 10.5 lbs.
Does the REV 10 come with a grille?
Yes, a protective grille is included. The grille is corrosion-resistant and designed to withstand marine conditions.
How do I clean and maintain the REV 10?
Use a soft damp cloth to wipe the speaker. Avoid abrasive cleaners, solvents, or high-pressure water. Regularly check mounting hardware for tightness.
What is the warranty on the Wet Sounds REV 10?
Wet Sounds offers a 2-year limited warranty against defects in materials and workmanship. Contact your dealer for warranty service.
Can I replace the tweeter or woofer in the REV 10?
Replacement parts are available through authorized Wet Sounds dealers. Repairs should be performed by a qualified technician to avoid damage.
User questions about REV 10 Wet Sounds
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual REV 10 - Wet Sounds and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. REV 10 by Wet Sounds.
USER MANUAL REV 10 Wet Sounds
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wet Sounds
Model : REV 10
Category : Loudspeaker