REVO 6 XS-S V3 - Loudspeaker Wet Sounds - Free user manual and instructions
Find the device manual for free REVO 6 XS-S V3 Wet Sounds in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker |
| Brand | Wet Sounds |
| Model | REVO 6 XS-S V3 |
| Driver Size | 6.5 inches (165 mm) |
| Power Handling (RMS) | 100 Watts |
| Power Handling (Peak) | 200 Watts |
| Impedance | 4 Ohms |
| Sensitivity | 90 dB @ 1W/1m |
| Frequency Response | 50 Hz – 20 kHz |
| Crossover | Integrated 12 dB/octave |
| Tweeter Type | 1-inch Titanium Dome |
| Enclosure Type | Infinite Baffle / Open Air |
| Water Resistance | IP65 (splash proof) |
| Material | UV-stabilized polypropylene cone, rubber surround |
| Grille | Stainless steel, painted |
| Mounting Diameter | 5.6 inches (142 mm) |
| Mounting Depth | 2.6 inches (66 mm) |
| Weight | 2.2 lbs (1.0 kg) each |
| Recommended Amplifier Power | 50–150 Watts RMS per channel |
| Warranty | 2 years limited |
| Maintenance | Clean with mild soap and water; avoid abrasive cleaners |
| Safety Precautions | Do not exceed rated power; secure mounting to prevent falling; avoid saltwater immersion |
| Spare Parts Availability | Contact Wet Sounds authorized dealers for grilles, screws, and service |
| Repairability | Modular design; tweeter and cone replacements possible |
| General Information | Designed for marine and powersports applications; UV and salt resistant |
Frequently Asked Questions - REVO 6 XS-S V3 Wet Sounds
How do I install the Wet Sounds REVO 6 XS-S V3 speaker?
Mount the speaker in a cutout diameter of 5.6 inches with 2.6 inches depth clearance. Secure with included screws and seal with silicone gasket if using in marine environments.
What is the recommended amplifier power?
Use an amplifier delivering 50 to 150 Watts RMS per channel at 4 Ohms for optimal performance.
Is this speaker waterproof?
Yes, it has an IP65 rating, meaning it is splash proof and resistant to water jets. It is suitable for marine use but not submersible.
How do I clean the speaker?
Wipe with a soft damp cloth using mild soap and water. Avoid harsh chemicals or high-pressure washers.
What is the warranty period?
Wet Sounds offers a 2-year limited warranty against defects in materials and workmanship.
Can I use these speakers in a boat?
Absolutely. The REVO 6 XS-S V3 is designed for marine environments with UV-stabilized materials and corrosion-resistant grilles.
Do I need a crossover?
No, the speaker has an integrated crossover (12 dB/octave) that separates frequencies for the tweeter and woofer.
How do I break in the speakers?
Play them at moderate volume for about 20 hours to loosen the suspension and achieve optimal sound quality.
What if I hear distortion?
Reduce the amplifier gain or check for clipping. Ensure the speaker is not overpowered and that the impedance matches.
Where can I find spare parts?
Contact an authorized Wet Sounds dealer or visit the official website for replacement grilles, screws, and service options.
User questions about REVO 6 XS-S V3 Wet Sounds
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual REVO 6 XS-S V3 - Wet Sounds and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. REVO 6 XS-S V3 by Wet Sounds.
USER MANUAL REVO 6 XS-S V3 Wet Sounds
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wet Sounds
Model : REVO 6 XS-S V3
Category : Loudspeaker