Architect Model 2660 - Receiver AudioControl - Free user manual and instructions
Find the device manual for free Architect Model 2660 AudioControl in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multi-Channel Receiver |
| Brand | AudioControl |
| Model | Architect Model 2660 |
| Number of Channels | 6 |
| Power Output | 60 watts per channel (8 ohms, 20-20 kHz, 0.1% THD) |
| Dimensions (W x H x D) | 17 x 3.5 x 12 inches (432 x 89 x 305 mm) |
| Weight | 25 lbs (11.3 kg) |
| Power Consumption | 600 watts (max) |
| Input Impedance | 20 k ohms (unbalanced), 40 k ohms (balanced) |
| Input Sensitivity | 1.0 V (for rated power) |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Signal-to-Noise Ratio | >100 dB (A-weighted) |
| Total Harmonic Distortion | <0.1% |
| Inputs | 6 x RCA unbalanced, 2 x XLR balanced, 1 x RJ-45 control port |
| Outputs | 6 x speaker binding posts, 1x RCA subwoofer out |
| Power Supply | 100-240 V AC, 50/60 Hz (switching) |
| Cooling | Internal fan, variable speed |
| Control | RS-232, IR, 12V trigger, front panel rotary volume |
| Maintenance | Clean with dry cloth; avoid liquids; ensure ventilation |
| Safety | Class 2 wiring; do not expose to rain or moisture |
| Spare Parts & Reparability | Contact AudioControl for authorized service; no user-serviceable parts inside |
Frequently Asked Questions - Architect Model 2660 AudioControl
How do I connect my sources to the Architect Model 2660?
Use unbalanced RCA cables for most sources or balanced XLR cables for professional gear. Connect the outputs to speakers using banana plugs or bare wire.
Can I use the 2660 in a multi-room setup?
Yes, the 2660 supports 6 channels ideal for distributed audio. Use the control port (RS-232 or IR) for integration with automation systems.
What is the recommended speaker impedance?
The receiver is rated for 4 to 8 ohms. For 4-ohm loads, ensure adequate ventilation as the unit may run warmer.
How do I adjust the volume?
Use the front panel rotary knob or external control via 12V trigger or RS-232. The unit also supports IR remote (sold separately).
Does the 2660 have a subwoofer output?
Yes, there is a dedicated RCA subwoofer output that provides a summed mono signal for an external powered subwoofer.
What is the power consumption in standby?
Standby power consumption is less than 1 watt, meeting Energy Star guidelines.
Can I bridge channels for more power?
No, the 2660 is not designed for bridging. Each channel operates independently.
How do I update the firmware?
Firmware updates are not user-accessible. Contact AudioControl support for any updates.
What should I do if the unit overheats?
Ensure at least 2 inches of clearance on all sides for ventilation. If overheating persists, reduce the volume or check for blocked vents.
Where can I find a replacement remote?
Original remotes may be available from AudioControl or authorized dealers. Alternatively, use IR learning systems.
User questions about Architect Model 2660 AudioControl
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Architect Model 2660 - AudioControl and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Architect Model 2660 by AudioControl.
USER MANUAL Architect Model 2660 AudioControl
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AudioControl
Model : Architect Model 2660
Category : Receiver