A1500.1 - Receiver AudioControl - Free user manual and instructions
Find the device manual for free A1500.1 AudioControl in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monoblock Car Audio Amplifier |
| Brand | AudioControl |
| Model | A1500.1 |
| Dimensions (H x W x L) | 2.1 x 7.5 x 13.5 inches (53 x 191 x 343 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Power Supply Voltage | 12V DC (11-16V) |
| RMS Power Output (4 ohms) | 600W x 1 |
| RMS Power Output (2 ohms) | 1000W x 1 |
| RMS Power Output (1 ohm) | 1500W x 1 |
| Frequency Response | 20Hz - 250Hz |
| Input Sensitivity | 0.2V - 5V |
| Low Pass Filter | Adjustable 30Hz - 250Hz |
| Subsonic Filter | Fixed 15Hz or 25Hz |
| Bass Boost | 0-18dB at 45Hz |
| Phase Control | 0° or 180° |
| Cooling | Convection, heatsink |
| Protection | Thermal, over-current, DC offset |
| Recommended Fuse | 150A (external) |
| Maintenance | Wipe with dry cloth; no liquids |
| Safety | Disconnect battery before installation |
| Spare Parts & Repairability | Contact AudioControl for service |
Frequently Asked Questions - A1500.1 AudioControl
What is the power output of the A1500.1?
The AudioControl A1500.1 delivers 600W RMS at 4 ohms, 1000W RMS at 2 ohms, and 1500W RMS at 1 ohm.
What impedance can this amplifier handle?
It is stable down to 1 ohm for a single subwoofer setup. Do not run below 1 ohm.
Does the A1500.1 have a subsonic filter?
Yes, it has a fixed subsonic filter switchable between 15Hz and 25Hz to protect your subwoofer.
What gauge power wire should I use?
For full power, use 1/0 AWG power and ground wire. For shorter runs, 4 AWG may suffice.
How do I adjust the gain?
Set head unit volume to about 75% and adjust gain clockwise until clipping is heard, then back off slightly. Use a multimeter or oscilloscope for precision.
Can I bridge this amplifier?
No, the A1500.1 is a monoblock amplifier and cannot be bridged. It is designed to power a single subwoofer.
What type of fuse does it need?
Use an external 150A fuse (ANL or mini-ANL) near the battery.
Does it have a remote bass knob?
Yes, it includes a wired remote bass level control (optional).
What is the input sensitivity range?
The input sensitivity is adjustable from 0.2V to 5V, compatible with most head units.
How do I clean the amplifier?
Turn off power and wipe the exterior with a dry, soft cloth. Do not use any liquids or cleaners.
User questions about A1500.1 AudioControl
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual A1500.1 - AudioControl and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A1500.1 by AudioControl.
USER MANUAL A1500.1 AudioControl
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AudioControl
Model : A1500.1
Category : Receiver