CDF8 72E10L-S - Dishwasher CANDY - Free user manual and instructions
Find the device manual for free CDF8 72E10L-S CANDY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Model | CDF8 72E10L-S |
| Brand | Candy |
| Place Settings | 10 |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 45 kg |
| Energy Class | E |
| Annual Energy Consumption | 295 kWh |
| Water Consumption per Cycle | 10 L |
| Noise Level | 44 dBA |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Number of Programs | 6 |
| Programs | Eco, Intensive, Normal, Quick, Glass, Pre-wash |
| Additional Functions | Delay Start, Half Load, Extra Dry |
| Interior Material | Stainless Steel |
| Adjustable Racks | Yes (upper basket height adjustable) |
| Indicators | Salt, Rinse Aid, Wi-Fi (if equipped) |
| Child Lock | Yes |
| Water Protection | AquaStop (anti-flood) system |
| Spare Parts Availability | Yes (10 years guaranteed) |
| Repairability Index | 7.5/10 (estimated based on brand policy) |
Frequently Asked Questions - CDF8 72E10L-S CANDY
How do I install the dishwasher?
Ensure the appliance is level and securely connected to water supply, drain, and power. Refer to the installation manual for detailed steps. Use the supplied inlet hose with a pressure rating of at least 1 MPa.
What programs are available and which one should I use?
Programs include Eco (energy-saving), Intensive (heavy soil), Normal (daily), Quick (light soil), Glass (delicate), and Pre-wash (rinse only). Choose Eco for standard loads to save energy.
How do I add salt and rinse aid?
Open the salt cap (usually at the bottom of the tub) and fill with dishwasher salt until the salt indicator goes out. For rinse aid, open the dispenser on the door and fill to the max level. Adjust settings as needed.
Why is the dishwasher not draining?
Check the drain hose for kinks or blockages. Clean the filter (located at the bottom) and ensure the pump impeller is not jammed. If the issue persists, reset the appliance by turning off power for 1 minute.
How do I clean the dishwasher?
Regularly clean the filter and spray arms to prevent clogs. Run an empty cycle with a dishwasher cleaner or vinegar (200 ml) on the highest temperature setting once a month.
What does error code E10 mean?
Error code E10 indicates a water inlet problem. Ensure the water tap is fully open and the inlet hose is not kinked. If the error persists, the water inlet valve may need replacement.
Can I use regular detergent tablets?
Yes, but ensure they are designed for dishwashers. Use all-in-one tablets for convenience, but for best results with salt and rinse aid, use separate products.
How do I enable the child lock?
Press and hold the Start/Reset button for 5 seconds until a lock symbol appears. To disable, repeat the same step. Refer to the control panel for specific button combinations.
What is the delay start function and how do I use it?
Delay start allows you to postpone the cycle by up to 24 hours. Press the Delay button repeatedly to set the desired delay (in hours), then start the cycle. The dishwasher will begin automatically after the delay.
How do I replace the spray arms?
Turn off the appliance and remove the lower and upper baskets. Unscrew or unclip the spray arm. Remove and clean the nozzles, then reinstall. Handle with care to avoid damage.
User questions about CDF8 72E10L-S CANDY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual CDF8 72E10L-S - CANDY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CDF8 72E10L-S by CANDY.
USER MANUAL CDF8 72E10L-S CANDY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CANDY
Model : CDF8 72E10L-S
Category : Dishwasher