DFP 58T1 NX UK EX - Dishwasher INDESIT - Free user manual and instructions
Find the device manual for free DFP 58T1 NX UK EX INDESIT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Dishwasher |
| Brand | Indesit |
| Model | DFP 58T1 NX UK EX |
| Color | Stainless steel |
| Capacity | 12 place settings |
| Height | 85 cm |
| Width | 60 cm |
| Depth | 60 cm |
| Net weight | 50 kg |
| Energy class | E |
| Water consumption | 9.5 L per cycle |
| Energy consumption | 0.95 kWh per cycle |
| Noise level | 49 dB(A) |
| Programs | 8 programs (Eco, Intensive, Quick, Prewash, etc.) |
| Options | Delayed start (1-24h), extra drying |
| Installation type | Freestanding |
| Safety | Anti-overflow protection, child lock |
| Tub material | Stainless steel |
| Filter | Self-cleaning |
| Repairability index | 7.2/10 |
| Warranty | 2 years parts and labor |
| Compliance | CE, RoHS |
| Cable length | 1.5 m |
| Water pressure | 0.04-1.0 MPa |
Frequently Asked Questions - DFP 58T1 NX UK EX INDESIT
How to clean the dishwasher filter?
To clean the filter, remove the lower basket then unscrew the cylindrical filter. Rinse it under running water and brush if necessary. Put it back by screwing it correctly. Perform this operation regularly to avoid bad odors.
Why is my dishwasher not draining?
If the water does not drain, first check that the drain hose is not kinked or blocked. Also clean the filter and the siphon. If the problem persists, it may be a faulty drain pump. Consult a professional.
How to add regenerating salt?
Open the cap of the salt reservoir (located under the lower basket). Fill with water to the brim, then add specific dishwasher salt until saturation. Close tightly and run a rinse cycle if needed.
What to do if the 'salt' light stays on after adding?
The light may take a few cycles to go off. Make sure you have closed the cap properly and used appropriate salt. If the light persists, check the salt level sensor.
How to start a program?
Place the dishes, add detergent and close the door. Press the On/Off button, select the desired program with the 'Programs' button, then press 'Start'. The cycle starts automatically.
Why are the dishes not drying properly?
Make sure you are using rinse aid. Check that extra drying is activated if necessary. Avoid overloading the dishwasher and leave the door ajar after the cycle to promote evaporation.
How to install the appliance?
Place the dishwasher on a flat surface. Connect the water supply hose to a cold water tap (pressure 0.04-1.0 MPa). Connect the drain hose to the siphon. Plug the power cord into a grounded outlet. Refer to the manual for leveling adjustments.
How to use the delayed start?
First select your program. Press the 'Delayed start' button several times to choose the desired delay (1 to 24 hours). Close the door, the start will be automatically delayed. A light flashes to confirm.
What to do if the appliance leaks?
Turn off the water supply and unplug the appliance. Check the hose connections, door seals, and base tray. If the leak comes from inside, clean the spray arms and filter. Contact a repairer if necessary.
Where to find spare parts for this model?
Spare parts are available on the official Indesit website or from authorized retailers. Use the model reference (DFP 58T1 NX UK EX) to order. Common parts (filters, gaskets, arms) are easily found.
User questions about DFP 58T1 NX UK EX INDESIT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DFP 58T1 NX UK EX - INDESIT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFP 58T1 NX UK EX by INDESIT.
USER MANUAL DFP 58T1 NX UK EX INDESIT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INDESIT
Model : DFP 58T1 NX UK EX
Category : Dishwasher