IN2FC10BS7A0S - Dishwasher INDESIT - Free user manual and instructions
Find the device manual for free IN2FC10BS7A0S INDESIT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Indesit |
| Model | IN2FC10BS7A0S |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | 45 kg |
| Energy Efficiency Class | D |
| Noise Level | 49 dB(A) |
| Capacity | 14 place settings |
| Number of Programs | 6 |
| Water Consumption per Cycle | 11 L |
| Energy Consumption per Cycle | 0.92 kWh |
| Quietest Program | Eco 50°C |
| Half Load Option | Yes |
| Delay Start | Yes, up to 24h |
| Self-Cleaning Filter | Yes |
| Type of Installation | Freestanding |
| Color | White |
| Control Type | Electronic push buttons |
| Display | LED display |
| Salt and Rinse Aid Indicators | Yes |
| Safety Features | Child lock, Water stop |
Frequently Asked Questions - IN2FC10BS7A0S INDESIT
How to install the dishwasher?
Place the dishwasher on a level surface. Connect the water inlet hose to a cold water supply with a 3/4 inch thread. Connect the drain hose to a siphon or sink drain. Plug into a grounded electrical outlet. Ensure the machine is level by adjusting the feet. For more details, refer to the installation manual.
How to clean the filter?
The filter system consists of a coarse filter and a fine filter. Rotate the coarse filter counterclockwise and remove it. Rinse both filters under running water. Reassemble and ensure they are securely locked. Clean the filter regularly to avoid blockages.
Why is the dishwasher not starting?
Check if the door is properly closed and latched. Ensure the power cord is plugged in and the circuit breaker is on. Verify that the water supply is open. The dishwasher may have a delay start activated; cancel it by pressing the delay button. If the issue persists, consult the error code.
How to use rinse aid?
Open the rinse aid dispenser lid. Fill with rinse aid up to the 'max' line. Close the lid. Adjust the rinse aid dosage according to water hardness using the dial (usually 1-6). Higher hardness requires higher dosage. Use recommended brands for best drying results.
What to do if dishes are not drying properly?
Select a program with a drying phase, like Eco 50°C or Intensive. Ensure rinse aid is filled and dosage is correct. Avoid overloading. Use a rinse aid such as Finish Jet-Dry. Also, leave the door slightly ajar after cycle to release humidity.
How to set the water hardness?
Refer to the manual to access the settings. Usually, press and hold the 'P' button for 3 seconds until the display shows the current hardness level (default 3). Use the program buttons to adjust from 1 (soft) to 5 (very hard). Confirm by pressing 'Start'. The hardness level affects salt consumption.
What does the E1 error mean?
Error E1 indicates a water intake problem. Check that the water tap is fully open and the inlet hose is not kinked. Ensure the water pressure is sufficient. Clean the inlet filter at the hose connection. If the error persists, contact support.
How to clean the spray arms?
Remove the spray arms by unscrewing the retaining nut. Rinse under water and use a toothpick to clear any clogged holes. Replace and tighten. Ensure they spin freely. Clean arms every few months for optimal performance.
Can I use dishwasher tablets?
Yes, you can use all-in-one tablets like Finish Quantum. Place the tablet in the detergent dispenser. For best results, select a program that matches the tablet's requirements (e.g., 50°C or higher). Tablets contain salt and rinse aid, so you may need to adjust those settings accordingly.
How to maintain the dishwasher?
Regularly clean the filter, spray arms, and door seal. Run a maintenance wash with a dishwasher cleaner every 2-3 months. Check the salt and rinse aid levels. Leave the door slightly open after cycles to prevent mold. Clean the exterior with a damp cloth.
User questions about IN2FC10BS7A0S INDESIT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual IN2FC10BS7A0S - INDESIT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IN2FC10BS7A0S by INDESIT.
USER MANUAL IN2FC10BS7A0S INDESIT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INDESIT
Model : IN2FC10BS7A0S
Category : Dishwasher