48-35-1311 - Laser level MILWAUKEE - Free user manual and instructions
Find the device manual for free 48-35-1311 MILWAUKEE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Laser Level |
| Model | 48-35-1311 |
| Brand | Milwaukee |
| Laser Class | Class II (IEC 60825-1) |
| Laser Wavelength | 635 nm (Red) |
| Self-Leveling Range | ±4° |
| Accuracy | ±1/8 inch at 50 feet (3.2 mm at 15 m) |
| Working Range (with detector) | Up to 200 ft (61 m) |
| Number of Lines | 2 (Horizontal and Vertical) |
| Power Source | 3 x AA Batteries |
| Battery Life | Up to 30 hours (continuous use) |
| Mounting Thread | 1/4-20 Tripod Mount |
| IP Rating | IP54 (splash and dust resistant) |
| Dimensions (H x W x D) | 4.5 x 2.8 x 2.1 inches (114 x 71 x 53 mm) |
| Weight (with batteries) | 1.2 lbs (0.54 kg) |
| Operating Temperature | 14°F to 122°F (-10°C to 50°C) |
| Included Accessories | Carrying case, target plate, detector (if applicable) |
| Warranty | 5 years limited warranty |
Frequently Asked Questions - 48-35-1311 MILWAUKEE
How do I calibrate the Milwaukee 48-35-1311 laser level?
The 48-35-1311 is self-leveling within ±4°. For a rough calibration check, place it on a stable surface, turn it on, and rotate 180°; the laser line should remain level. If not, contact Milwaukee service. Do not attempt manual adjustment.
What type of batteries does it use and how long do they last?
It uses 3 AA alkaline batteries. Under normal use, battery life is up to 30 hours. Use fresh batteries for best performance and remove them during long storage.
Can I use the laser level outdoors?
Yes, but the built-in laser detector is recommended for outdoor use in bright conditions. The working range with a detector is up to 200 ft. Without a detector, the range is reduced to approximately 50-100 ft depending on light.
Is the laser level waterproof?
It has an IP54 rating, meaning it is protected against dust and splashing water from any direction. It is not submersible. Avoid prolonged exposure to heavy rain or immersion.
How do I mount the device on a tripod?
The base has a 1/4-20 threaded insert that fits standard camera tripods. Simply screw the tripod's mounting bolt into the hole until hand-tight. It also has a magnetic mount for ferrous surfaces.
What does the green light on the side indicate?
A steady green light indicates the laser is self-leveled and ready for use. A flashing green light means the unit is still leveling or is outside its self-leveling range. Red indicates low battery or a fault.
Can I lock the pendulum for transport?
Yes, there is a pendulum lock switch that secures the internal mechanism for transport. Always engage the lock before moving or storing the laser to prevent damage.
How do I clean the laser lens?
Wipe the lens gently with a soft, dry cloth. If necessary, use a lens cleaning solution applied to the cloth, not directly on the lens. Avoid abrasive materials that might scratch the optics.
What is included in the box?
The package includes: the 48-35-1311 laser level, a hard carrying case, a target plate, and three AA batteries. Some retailers may also include a detector or tripod bracket; check your product listing.
Does Milwaukee offer a warranty for this model?
Yes, Milwaukee provides a 5-year limited warranty against defects in material and workmanship. Register your product on Milwaukee's website to activate warranty coverage.
User questions about 48-35-1311 MILWAUKEE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Laser level in PDF format for free! Find your manual 48-35-1311 - MILWAUKEE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 48-35-1311 by MILWAUKEE.
USER MANUAL 48-35-1311 MILWAUKEE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MILWAUKEE
Model : 48-35-1311
Category : Laser level