ELS2A - Measurement Amprobe - Free user manual and instructions
Find the device manual for free ELS2A Amprobe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electrical Tester |
| Model | ELS2A |
| Brand | Amprobe |
| Dimensions (approx.) | 150 mm x 30 mm x 20 mm |
| Weight (with batteries) | Approx. 100 g |
| Power Supply | 2 x 1.5V AAA batteries |
| Measurement Functions | AC/DC Voltage, Resistance, Continuity, Diode Test |
| AC Voltage Range | 0-600 V |
| DC Voltage Range | 0-600 V |
| Resistance Range | 0-20 MΩ |
| Continuity Test | Audible beep below 50 Ω |
| Safety Rating | CAT III 600V |
| Display | LCD, 2000 counts |
| Overload Protection | Up to 660V rms |
| Auto Power Off | After 15 minutes of inactivity |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | Max 80% non-condensing |
| Cleaning | Wipe with a damp cloth; do not use solvents |
| Battery Replacement | When low battery indicator appears |
| Spare Parts | Test leads, batteries; contact Amprobe support |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - ELS2A Amprobe
How do I measure voltage with the ELS2A?
Turn the rotary switch to the voltage setting (AC or DC). Insert the black lead into COM and red lead into V. Touch the probes to the circuit and read the display. Ensure proper range selection.
What is the maximum voltage I can measure?
The ELS2A can measure up to 600 V AC or DC. Exceeding this may damage the meter. Always respect CAT III 600V safety limits.
How do I test continuity?
Set the dial to continuity test (diode symbol). Connect probes to the circuit. A beep sounds if resistance is below 50 Ω. Disconnect power before testing.
Why does my meter turn off automatically?
The auto power off feature activates after 15 minutes of no activity to save battery. Press any button or rotate the dial to wake it up. You can disable this feature if needed.
What type of batteries does it use?
The ELS2A uses two AAA 1.5V batteries. Replace when the low battery indicator appears. Use alkaline batteries for best performance.
Can I measure resistance on live circuits?
No! Always turn off power and discharge capacitors before measuring resistance. Measuring resistance on live circuits can damage the meter and harm you.
How do I clean and store the ELS2A?
Wipe the exterior with a damp cloth and mild detergent. Do not use solvents. Store in a dry place at room temperature. Remove batteries if storing for long periods.
Is the ELS2A safe for use on household outlets?
Yes, it is rated CAT III 600V, suitable for household and commercial electrical systems. Always follow safety guidelines and use insulated probes.
The display shows 'OL'. What does it mean?
'OL' means overload, indicating the measurement exceeds the selected range. Switch to a higher range or check the circuit. Overvoltage may damage the meter.
Where can I find replacement test leads?
Contact Amprobe customer support or visit their website. Use only specified leads rated for CAT III 600V. Never use damaged leads.
User questions about ELS2A Amprobe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual ELS2A - Amprobe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ELS2A by Amprobe.
USER MANUAL ELS2A Amprobe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Amprobe
Model : ELS2A
Category : Measurement