HDSP164K - Hi-Fi System KanexPro - Free user manual and instructions
Find the device manual for free HDSP164K KanexPro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hi-Fi System |
| Model | HDSP164K |
| Brand | KanexPro |
| Dimensions (W x H x D) | 430 x 140 x 330 mm |
| Weight | 6.5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Output | 2 x 50W RMS |
| Frequency Response | 20 Hz - 20 kHz |
| Connectivity | Bluetooth 5.0, USB, AUX, FM radio |
| Supported Audio Formats | MP3, WMA, WAV, FLAC |
| Control | Front panel buttons and remote control |
| Display | LED display with clock/frequency |
| Speaker Configuration | 2-way bass reflex speakers |
| Cabinet Material | Wooden MDF with black finish |
| Maintenance | Wipe with soft dry cloth; avoid solvents |
| Safety | Do not expose to water or heat sources |
| Spare Parts | Remote control, power cord available |
| Repairability | Refer to qualified service center |
| Package Contents | Main unit, 2 speakers, remote, manual |
Frequently Asked Questions - HDSP164K KanexPro
How do I pair my phone via Bluetooth?
Press the Bluetooth button on the front panel until the LED flashes. On your phone, select 'KanexPro HDSP164K' from the Bluetooth list. The LED will become solid when connected.
Can I use the USB port to charge my phone?
No, the USB port is for playing music from a USB drive only. It does not support charging.
How to set the clock?
Press and hold the Clock button until the hour flashes. Use the + and - buttons to set the hour, then press Clock again to set minutes. Press Clock to confirm.
What is the maximum USB drive capacity?
The system supports USB drives up to 32GB formatted in FAT32.
How to clean the speakers?
Use a soft, dry cloth to wipe the exterior. Do not use any chemical cleaners or water directly on the speakers.
The remote control is not working. What should I do?
Check the batteries; replace them if needed. Ensure there are no obstructions between the remote and the system's sensor. Point the remote directly at the front panel.
How to switch between radio and Bluetooth?
Press the Source button repeatedly to cycle through modes: Bluetooth, FM Radio, USB, and AUX.
Can I connect a TV or computer?
Yes, use the AUX input with a 3.5mm audio cable. Connect one end to the system's AUX port and the other to your TV/computer headphone jack.
Why is there no sound from the left speaker?
Check the speaker wire connections at both ends. Ensure the wires are firmly inserted. Try swapping the left and right speakers to isolate the issue.
Does the system have a warranty?
Yes, the KanexPro HDSP164K comes with a 1-year limited warranty. For warranty claims, contact KanexPro customer support with your proof of purchase.
User questions about HDSP164K KanexPro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual HDSP164K - KanexPro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDSP164K by KanexPro.
USER MANUAL HDSP164K KanexPro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KanexPro
Model : HDSP164K
Category : Hi-Fi System