Lipsk - Synthesizer Xaoc - Free user manual and instructions
Find the device manual for free Lipsk Xaoc in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Eurorack Synthesizer Module |
| Model | Lipsk |
| Brand | Xaoc Devices |
| Width | 12 HP |
| Depth | 30 mm (including ribbon cable) |
| Weight | 140 g |
| Power Consumption | +12V: 70 mA, -12V: 30 mA |
| Power Connector | 10-pin Eurorack ribbon cable (shrouded) |
| Main Functions | Dual envelope generator, LFO mode, analog VCA, voltage-controlled shape and time |
| Envelope Modes | ADSR, AD, AR, Loop, and Cycle (LFO) |
| Control Voltage Inputs | 2x CV in (0-10V), 2x Gate in, 2x Shape CV (0-5V), 2x Time CV (0-5V) |
| Audio Outputs | 2x Envelope out (±5V or 0-10V selectable), 2x VCA out (0-5V gain) |
| Front Panel Controls | 8 knobs (Time, Shape, Level, Offset), 2 gate buttons, mode switches |
| Sample Rate | Analog circuit, no sample rate |
| Frequency Response | DC-coupled, suitable for CV and audio |
| Construction | Skiff-friendly design, aluminum front panel, PCB material |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Maintenance | Clean with a soft, dry cloth; avoid solvents. Disconnect power before cleaning. |
| Safety | Low voltage (Eurorack standard). Do not exceed specified power draw. Ensure correct polarity. |
| Spare Parts & Repairability | Contact Xaoc or authorized dealers. Reverse polarity protection diode replaceable. Module is not user-serviceable beyond basic checks. |
| Included Accessories | Ribbon cable, mounting screws, manual |
Frequently Asked Questions - Lipsk Xaoc
What is the Lipsk module used for?
The Lipsk is a dual envelope generator with integrated VCA and LFO capabilities. It can generate classic ADSR, AD, AR envelopes, loop continuously, or act as a voltage-controlled LFO.
How do I power the Lipsk module?
Connect the included 10-pin ribbon cable to your Eurorack power bus (typically +12V red stripe down). Ensure the red stripe indicates -12V. Power consumption is +12V 70mA, -12V 30mA.
Can I use Lipsk with audio signals?
Yes, the VCAs are DC-coupled and can process both control voltages and audio signals up to ±10V. The envelope outputs can be set to bipolar (±5V) or unipolar (0-10V).
How do I set the envelope to loop (LFO mode)?
Set the mode switch to LOOP or CYCLE. In this mode, the envelope runs continuously as an LFO. The Time and Shape controls adjust the waveform and speed.
What is the ideal Eurorack power supply for Lipsk?
Any standard Eurorack power supply that provides +12V and -12V rails. Lipsk draws 70mA on +12V and 30mA on -12V. Ensure your power supply can handle the total current of all modules.
How do I calibrate the Lipsk?
The Lipsk is factory calibrated and does not require user calibration. If you suspect drift, contact Xaoc support. There are no user-adjustable trimmers on the front panel.
Can I use Lipsk with my 5V system?
Lipsk is designed for the Eurorack standard with ±12V supply. It does not require a +5V rail. It can accept gate voltages as low as 3V (TTL compatible) but works best with 5V to 10V gates.
What is the maximum output voltage of the envelope?
In unipolar mode, envelope outputs reach 0 to +10V. In bipolar mode, they swing ±5V. VCA outputs have a maximum gain of 0 to +5V (with +5V CV input).
Does Lipsk have a built-in sequencer?
No, Lipsk is purely an envelope generator/LFO/VCA. It does not generate note sequences. You can gate it from an external sequencer or keyboard.
How do I clean my Lipsk module?
Use a soft, lint-free cloth slightly dampened with water or isopropyl alcohol (70%) to gently wipe the front panel. Avoid moisture entering the module. Always disconnect power before cleaning.
User questions about Lipsk Xaoc
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual Lipsk - Xaoc and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Lipsk by Xaoc.
USER MANUAL Lipsk Xaoc
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Xaoc
Model : Lipsk
Category : Synthesizer