Drezno - Synthesizer Xaoc - Free user manual and instructions
Find the device manual for free Drezno Xaoc in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Synthesizer Module |
| Brand | Xaoc Devices |
| Model | Drezno |
| Category | Binary Converter / Logic Module |
| Width | 8 HP |
| Depth | Approx. 30 mm |
| Weight | Approx. 130 g |
| Power Supply | +12V (70 mA), -12V (10 mA) |
| Power Connector | Eurorack 10-pin ribbon cable |
| Main Functions | 8-bit analog-to-digital and digital-to-analog conversion, binary logic operations, oscillator and envelope generation |
| Inputs | 2 analog inputs (ADC), 8 digital inputs (bit), 1 clock input |
| Outputs | 2 analog outputs (DAC), 8 digital outputs (bit), 1 clock output |
| Controls | 3 potentiometers for gain, offset, and clock division; 4 toggle switches for mode selection |
| LED Indicators | 8 bi-color LEDs for bit status; 2 tri-color LEDs for analog signal levels |
| Construction | High-quality PCB, aluminum front panel, RoHS compliant |
| Temperature Range | 0°C to 50°C |
| Warranty | 2 years limited warranty |
| Repairability | Designed for easy replacement of modules; professional repair recommended |
| Included Accessories | Power cable, mounting screws, user manual |
| Maintenance | Keep dry and clean; use isopropyl alcohol on contact points |
Frequently Asked Questions - Drezno Xaoc
What is the Xaoc Drezno?
The Xaoc Drezno is a Eurorack module that converts analog signals to 8-bit digital data and vice versa. It can also be used as a binary logic processor, oscillator, or envelope generator.
How do I power the Drezno?
Connect the included 10-pin ribbon cable to your Eurorack case's busboard, ensuring the red stripe aligns with the -12V marking on the module and case.
What are the main modes of operation?
The Drezno has four modes selectable via toggle switches: ADC/DAC (analog conversion), Logic (binary operations), Clock (clock division), and Quantizer (pitch quantization).
How do I use the Drezno as an oscillator?
In DAC mode, patch a digital pattern (e.g., from a sequencer) into the bit inputs, and the Drezno outputs a corresponding analog waveform at the analog output.
Can I process CV signals?
Yes, the Drezno can process control voltage signals up to ±10V. Use the gain potentiometer to adjust the input range.
What is the clock input for?
The clock input synchronizes the Drezno's internal operations (e.g., bit shifting, sampling) to an external tempo or gate signal.
How do I reset all bits to zero?
Toggle the Reset switch (if available) or send a gate signal to the reset input. Alternatively, power cycle the module.
What kind of cables do I need?
Use standard 3.5mm mono TS patch cables for all analog and digital connections.
How do I clean the module?
Unplug the module and use a dry or slightly damp cloth. For contacts, use isopropyl alcohol and a lint-free swab.
Where can I find firmware updates?
Visit the Xaoc Devices website or check your retailer. The Drezno firmware can be updated via the USB port (if supported) or manually.
User questions about Drezno Xaoc
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual Drezno - Xaoc and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Drezno by Xaoc.
USER MANUAL Drezno Xaoc
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Xaoc
Model : Drezno
Category : Synthesizer