CDP 1LS39X/T - Dishwasher CANDY - Free user manual and instructions
Find the device manual for free CDP 1LS39X/T CANDY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Candy |
| Model | CDP 1LS39X/T |
| Dimensions (H x W x D) | 85 cm x 59.6 cm x 59 cm |
| Weight | Approx. 42 kg |
| Energy Efficiency Class | D |
| Noise Level | 47 dB(A) |
| Capacity (Place Settings) | 15 |
| Number of Programs | 8 |
| Water Consumption per Cycle | 10 L |
| Energy Consumption per Cycle | 0.95 kWh |
| Drying Performance | Condensation drying |
| Available Programs | Eco, Intensive, Normal, Quick, Soak, Glass, Auto, Rinse |
| Delay Start | Yes (up to 24 hours) |
| Water Safety System | Aquastop (anti-flood) |
| Salt and Rinse Aid Indicator | Yes |
| Filter Type | Self-cleaning triple filter system |
| Interior Material | Stainless steel |
| Spare Parts Availability | Spare parts available from manufacturer for up to 10 years |
| Repairability Index | 8.2/10 |
Frequently Asked Questions - CDP 1LS39X/T CANDY
How do I start a wash cycle on my Candy CDP 1LS39X/T dishwasher?
Load the dishes, add detergent, close the door, select a program using the buttons, and press the start button. The dishwasher will begin after a short delay.
What does the salt indicator light mean?
The salt indicator lights up when the dishwasher salt is low. Refill the salt reservoir to maintain water softener performance and prevent limescale.
How do I clean the filters?
Turn the coarse filter counterclockwise and lift it out. Rinse under running water. Remove the fine filter and rinse. Refit in reverse order. Clean filters every month.
Why is my dishwasher not draining?
Check the drain hose for kinks or blockages. Clean the filters. If clogged, remove debris from the drain pump area. Ensure the hose is not too high.
Can I use regular dishwashing liquid instead of dishwasher detergent?
No, use only special dishwasher detergent in powder, gel, or tablet form. Regular dish soap creates excess suds and can damage the appliance.
What do the error codes mean?
Common codes: E1 (water inlet fault), E2 (drain fault), E3 (heating fault). Refer to the manual for a complete list. Reset by unplugging for a minute.
How do I adjust the rinse aid dosage?
Open the rinse aid dispenser and adjust the dial between 1 (low) and 6 (high). Recommended setting is 3-4 for normal water hardness.
Why are there white spots on my dishes?
White spots indicate hard water deposits. Increase the rinse aid dosage and ensure the salt reservoir is full. Use a water softener if needed.
What is the Eco program and how long does it take?
The Eco program is energy-efficient and uses less water and energy. It typically runs for about 3 hours at 50°C. It's suitable for normally soiled dishes.
How do I install the dishwasher?
Ensure the installation area is level. Connect the water inlet hose to a cold water supply (3/4 inch). Attach the drain hose to a sink drain. Plug into a grounded outlet. Level the feet.
User questions about CDP 1LS39X/T CANDY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual CDP 1LS39X/T - CANDY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CDP 1LS39X/T by CANDY.
USER MANUAL CDP 1LS39X/T CANDY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CANDY
Model : CDP 1LS39X/T
Category : Dishwasher