COM-819 - Access Point Steren - Free user manual and instructions
Find the device manual for free COM-819 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Point |
| Brand | Steren |
| Model | COM-819 |
| Wireless Standards | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 150 Mbps |
| Antenna | Internal omni-directional |
| Security | WEP, WPA, WPA2 |
| Power Supply | 5V DC, 1A via micro USB |
| Power over Ethernet (PoE) | Not supported |
| Dimensions (L x W x H) | 100 x 80 x 25 mm |
| Weight | 150 g |
| Ethernet Port | 1 x 10/100 Mbps LAN |
| Reset Button | Yes, pinhole reset |
| Operating Modes | Access Point, Repeater, WISP |
| SSID Broadcast | Enable/Disable |
| Number of SSIDs | 1 main SSID |
| LED Indicators | Power, LAN, WLAN |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% RH (non-condensing) |
| Recommended Cleaning | Use a dry, soft cloth |
| Spare Parts / Repairability | Not available, replace unit if defective |
Frequently Asked Questions - COM-819 Steren
How do I reset the Steren COM-819 to factory defaults?
Locate the reset button (pinhole) on the device. Use a paperclip to press and hold the button for 10 seconds until the LED indicators flash. The device will reboot with factory settings.
What is the default IP address for accessing the web interface?
The default IP address is usually 192.168.10.1. You can also try 192.168.1.254. Check the label on the device for exact details.
Can I use the COM-819 as a wireless repeater?
Yes, the COM-819 supports Repeater mode. Access the web interface, go to 'Operating Mode', and select 'Repeater'. Then scan for the main network and enter its password.
What is the maximum number of devices that can connect?
The device can typically support up to 15-20 simultaneous connections, depending on network traffic and environment.
How do I change the Wi-Fi password?
Log in to the web interface, navigate to 'Wireless Settings', and update the 'Security Key' or 'Passphrase' field. Save the settings and reboot the device.
Does the device support PoE (Power over Ethernet)?
No, the COM-819 does not support PoE. It requires a 5V DC power supply via micro USB.
What should I do if the device is not showing up in Wi-Fi networks?
First, check if the device is powered on and the LAN/WLAN LEDs are lit. Try a reset to factory defaults. If still not visible, ensure the SSID is not hidden and the wireless mode is enabled.
How can I extend the range of my Steren access point?
Place the access point in a central location, away from obstacles. You can also adjust the antenna orientation if external, or consider using it in Repeater mode with another access point.
Is it possible to create a guest network?
The COM-819 typically supports only one SSID. For guest network features, check if the firmware offers a 'Guest Network' option in advanced settings; if not, it's not available.
Where can I download the user manual?
The user manual is available for free download on notice-facile.com or the Steren official website in PDF format.
User questions about COM-819 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual COM-819 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COM-819 by Steren.
USER MANUAL COM-819 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : COM-819
Category : Access Point