COM-8230 - Access Point Steren - Free user manual and instructions
Find the device manual for free COM-8230 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | Steren |
| Model | COM-8230 |
| Wireless Standard | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 150 Mbps |
| Antenna | Internal antenna, 2 dBi |
| Ports | 1 x Ethernet LAN (10/100 Mbps) |
| Power Supply | 5V DC, 1A |
| Dimensions | 120 x 100 x 25 mm |
| Weight | 150 g |
| Security | WEP, WPA, WPA2 |
| Setup Interface | Web-based management |
| Operation Modes | Access Point, Repeater, WDS |
| Care and Cleaning | Wipe with a dry, soft cloth |
| Safety Precautions | Do not expose to water or moisture |
| Spare Parts and Repairability | Replacement parts available through Steren service centers |
| General Information | Compact design for home or office use |
Frequently Asked Questions - COM-8230 Steren
How do I reset the Steren COM-8230 to factory defaults?
Locate the reset button on the device. Press and hold it for about 10 seconds while the device is powered on. The device will restart and restore all settings to factory defaults.
How do I configure the access point for the first time?
Connect the device to your computer via an Ethernet cable, then power it on. Open a web browser and enter the default IP address 192.168.0.1. Use the default username admin and password admin to log in and follow the setup wizard.
What is the default IP address and login credentials?
The default IP address is 192.168.0.1, and the default username and password are both admin. It is recommended to change these after initial setup for security.
How can I secure my wireless network with WPA2?
Access the web interface, go to Wireless settings, and select WPA2-PSK as the security mode. Enter a strong passphrase of at least 8 characters, then save and apply the settings.
Can the COM-8230 work as a wireless repeater?
Yes, the device supports Repeater mode. Configure it through the web interface by selecting Repeater mode and entering the SSID and password of the network you wish to extend.
What is the maximum wireless range of the access point?
The range typically covers up to 100 meters in open space and about 30 meters indoors. Actual range depends on environmental factors such as walls and interference.
How do I update the firmware of the Steren COM-8230?
Visit the official Steren support page to download the latest firmware for the COM-8230. Then, in the web interface, go to System Tools -> Firmware Upgrade, select the downloaded file, and click Upgrade. Do not disconnect power during the process.
The device is not powering on. What should I check?
Check that the power adapter is properly connected and the outlet works. Ensure you are using the correct 5V DC adapter. If the issue persists, try a different adapter or contact Steren technical support.
How do I connect the access point to an existing router?
Use an Ethernet cable to connect one of the router's LAN ports to the COM-8230's Ethernet port. Then configure the device in Access Point mode with a matching SSID and password to create a seamless network.
What is the warranty period for the Steren COM-8230?
Steren offers a 12-month warranty against manufacturing defects. Keep your receipt as proof of purchase and contact Steren for warranty service or repairs.
User questions about COM-8230 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual COM-8230 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COM-8230 by Steren.
USER MANUAL COM-8230 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : COM-8230
Category : Access Point