BPS 686X - Loudspeaker GoGen - Free user manual and instructions
Find the device manual for free BPS 686X GoGen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Model | BPS 686X |
| Brand | GoGen |
| Dimensions (W x H x D) | 200 mm x 100 mm x 100 mm |
| Weight | 1.2 kg |
| Power Source | Built-in rechargeable lithium-ion battery (3000 mAh) or AC adapter (5V, 2A) |
| Battery Life | Up to 8 hours at moderate volume |
| Bluetooth Version | 5.0 |
| Wireless Range | 10 meters |
| Speaker Output Power | 10W RMS |
| Frequency Response | 100 Hz - 20 kHz |
| Impedance | 4 ohms |
| Connectivity | Bluetooth 5.0, AUX 3.5 mm, USB-A for playback, microSD card slot |
| Additional Functions | FM radio, hands-free speakerphone, TWS pairing, LED light effects |
| Water Resistance | IPX5 (splash-proof) |
| Controls | Buttons: power, volume +/-, play/pause, next/previous track, mode, LED control |
| Charging Time | Approximately 3 hours |
| Recommended Cleaning | Wipe with a soft, dry cloth. Do not use abrasive cleaners. |
| Safety Precautions | Do not expose to extreme heat or moisture. Use only supplied charger. |
| Spare Parts / Repairability | Contact GoGen support for battery replacement or repair |
Frequently Asked Questions - BPS 686X GoGen
How do I pair my GoGen BPS 686X with a Bluetooth device?
Turn on the speaker. Press the Bluetooth button (or the mode button until Bluetooth is selected). The speaker will enter pairing mode (LED flashes blue). On your device, search for 'GoGen BPS 686X' and connect. If prompted, enter PIN 0000.
How do I charge the speaker?
Use the included microUSB cable (or USB-C, check your model). Connect to a 5V 2A USB charger. The LED indicator will show red while charging and turn off when fully charged. Charging time is approximately 3 hours.
Can I use the speaker while charging?
Yes, you can use the speaker while it is plugged into a power source. However, the battery will charge slower if you play music at high volume.
What should I do if the speaker doesn't turn on?
First, charge the speaker for at least 30 minutes. If it still doesn't turn on, try resetting by pressing and holding the power button for 10 seconds. If the issue persists, contact GoGen support.
How do I reset the GoGen BPS 686X?
To reset, press and hold the power button and volume + simultaneously for about 5 seconds until the speaker restarts. This clears all paired devices and restores default settings.
Can I connect two GoGen BPS 686X speakers together?
Yes, if your model supports TWS (True Wireless Stereo). Turn on both speakers. On one, double-press the Bluetooth button (or mode button) to enter pairing mode. The second speaker will automatically pair. Then connect your phone to the master speaker.
How do I use the FM radio?
Press the mode button until you reach FM mode. The speaker will automatically scan for stations (a short press of play/pause may trigger auto-scan). Use the volume buttons to navigate presets. For better reception, connect the AUX cable as an antenna.
What is the maximum volume?
The speaker has a total output of 10W RMS. Adjust volume via the buttons or your connected device. At maximum volume, there may be slight distortion. For best sound, keep volume below 80%.
Is the speaker waterproof?
The GoGen BPS 686X has an IPX5 rating, meaning it is splash-proof from any direction. It can withstand light rain or splashes, but do not submerge it in water.
How do I clean the speaker?
Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or liquids. Avoid getting moisture in the ports.
User questions about BPS 686X GoGen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual BPS 686X - GoGen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BPS 686X by GoGen.
USER MANUAL BPS 686X GoGen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GoGen
Model : BPS 686X
Category : Loudspeaker