COMICS BPS 330 - Loudspeaker GoGen - Free user manual and instructions
Find the device manual for free COMICS BPS 330 GoGen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Wireless Speaker |
| Brand | GoGen |
| Model | COMICS BPS 330 |
| Connectivity | Bluetooth wireless connection |
| Bluetooth Range | Up to 10 meters |
| Output Power | 10W RMS |
| Frequency Response | 100 Hz - 20 kHz |
| Battery Capacity | 2000 mAh |
| Playback Time | Up to 10 hours |
| Charging Time | Approximately 3 hours |
| Charging Port | Micro USB charging port |
| Auxiliary Input | 3.5 mm audio input |
| MicroSD Card Slot | Supports TF card up to 32 GB |
| Controls | Buttons for power, volume, and playback |
| Weight | Approximately 520 g |
| Dimensions | 210 x 75 x 75 mm |
| Water Resistance | IPX5 splash-proof |
| Accessories | USB charging cable, audio cable, manual |
| Maintenance | Clean with a soft dry cloth |
| Safety | Do not expose to extreme heat or moisture |
| Repairability | Battery replacement by qualified personnel |
Frequently Asked Questions - COMICS BPS 330 GoGen
How do I pair my Bluetooth device?
Turn on the speaker by pressing and holding the power button. Activate Bluetooth on your phone and search for COMICS BPS 330. Select it to connect. The speaker will announce a successful connection.
How long does the battery last?
The built-in rechargeable battery offers up to 10 hours of playback time at moderate volume. Actual duration depends on volume level and audio content.
How do I charge the speaker?
Use the included USB cable to connect the speaker to a 5V power adapter or a computer USB port. The charging indicator lights up while charging and turns off when fully charged. Charging takes about 3 hours.
Can I use the speaker while it is charging?
Yes, you can play music while the speaker charges, although the charging time may be longer and the sound quality could be slightly affected by interference.
Is the COMICS BPS 330 waterproof?
The speaker is IPX5 rated, meaning it is protected against water splashes and light rain. However, do not submerge it in water.
How do I reset the speaker if it stops responding?
Turn off the speaker and wait 10 seconds, then turn it back on. If the problem persists, try pairing again or use a paperclip to press the reset button if available.
Can I connect the speaker to a non-Bluetooth audio source?
Yes, use the 3.5 mm audio cable to connect the speaker to devices with a headphone jack, such as older CD players or laptops without Bluetooth.
How do I play music from a microSD card?
Insert a microSD card with MP3 files into the card slot. The speaker will automatically switch to card mode and start playing the tracks. Use the buttons to control playback.
What should I do if there is no sound?
Check if the volume is set to an audible level on both the speaker and the connected device. Verify that the speaker is paired or the audio cable is firmly inserted. Try another audio source to isolate the problem.
How do I clean and maintain the speaker?
Clean the speaker with a soft, dry cloth. Avoid using water, solvents, or harsh chemicals. Do not expose the speaker to dust, high humidity, or direct sunlight for extended periods.
User questions about COMICS BPS 330 GoGen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual COMICS BPS 330 - GoGen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COMICS BPS 330 by GoGen.