CSW100 - Loudspeaker POLK - Free user manual and instructions
Find the device manual for free CSW100 POLK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Center Channel Speaker |
| Model | CSW100 |
| Brand | Polk Audio |
| Dimensions (W x H x D) | 18.0 in x 7.0 in x 8.0 in (457 mm x 178 mm x 203 mm) |
| Weight | 10.0 lbs (4.5 kg) |
| Impedance | 8 ohms |
| Sensitivity | 89 dB (2.83V/1m) |
| Frequency Response | 55 Hz - 25 kHz |
| Recommended Power Handling | 20 - 125 watts per channel |
| Tweeter | 1-inch silk dome |
| Woofer | Dual 5.25-inch polymer composite cone |
| Crossover Frequency | 2.5 kHz |
| Enclosure Type | Bass reflex with rear port |
| Inputs | 5-way binding posts |
| Cabinet Finish | Black woodgrain vinyl |
| Grille | Detachable black cloth |
| Mounting Options | Bookshelf or wall-mount (keyhole slots) |
| Cleaning Instructions | Wipe with a soft, dry cloth |
| Safety Warnings | Do not expose to water or excessive heat |
| Replacement Parts | Not available; repair by authorized service center |
| General Information | Designed for surround sound systems; magnetically shielded to avoid TV interference |
Frequently Asked Questions - CSW100 POLK
How should I connect the Polk CSW100 to my AV receiver?
Connect the speaker using speaker wire to the center channel output of your AV receiver. Ensure proper polarity (+/-) and tighten the binding posts securely.
What is the ideal placement for the CSW100 center channel?
Place the center speaker directly above or below your TV, at ear level when seated. Avoid placing it inside enclosed cabinets to prevent muffled sound.
Can I bi-wire or bi-amp the CSW100?
No, the CSW100 has a single pair of binding posts and does not support bi-wiring or bi-amping. Use a standard single-wire connection.
What is the recommended amplifier power for the CSW100?
Polk recommends an amplifier with 20 to 125 watts per channel into 8 ohms. Ensure the receiver or amplifier is rated for 8-ohm loads.
Is the Polk CSW100 magnetically shielded?
Yes, the CSW100 is magnetically shielded, allowing safe placement near CRT televisions without causing color distortion.
How do I clean the CSW100 speaker?
Use a soft, dry cloth to dust the cabinet. The grille can be removed and gently vacuumed with a brush attachment. Do not use liquids or cleaning chemicals.
What is the frequency response of the CSW100?
The frequency response is 55 Hz to 25 kHz, providing clear dialogue and extended high-frequency response for detailed sound.
Can the CSW100 be wall-mounted?
Yes, the speaker includes keyhole slots on the back for wall mounting. Use appropriate screws and anchors rated for the speaker's weight (10 lbs).
What is the warranty coverage for the Polk CSW100?
Polk Audio typically offers a 5-year limited warranty for speakers. Keep your original receipt as proof of purchase for warranty claims.
Why is there no sound from the center channel?
Check that the speaker wire connections are secure and polarity is correct. Ensure your AV receiver is set to a surround sound mode that includes the center channel. Also verify the speaker is enabled in the receiver's speaker setup.
User questions about CSW100 POLK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual CSW100 - POLK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CSW100 by POLK.
USER MANUAL CSW100 POLK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : POLK
Model : CSW100
Category : Loudspeaker