XR-30X - Video projector SHARP - Free user manual and instructions
Find the device manual for free XR-30X SHARP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Single-chip DLP Video Projector |
| Model | XR-30X |
| Brand | Sharp |
| Resolution | 1024 x 768 (XGA) |
| Brightness | 3000 ANSI lumens |
| Contrast Ratio | 2000:1 |
| Lamp Type | UHP 200W |
| Lamp Life (Normal Mode) | 3000 hours |
| Lamp Life (Eco Mode) | 4000 hours |
| Dimensions (W x H x D) | 315 x 94 x 280 mm |
| Weight | 3.4 kg |
| Power Consumption | 300W (max), 0.5W (standby) |
| Power Supply | AC 100-240V, 50/60Hz |
| Inputs | HDMI (x1), VGA (x2), Composite Video, S-Video, Audio (3.5mm) |
| Outputs | VGA (monitor out), Audio (3.5mm) |
| Control | RS-232C, USB (service only) |
| Projection Lens | F=2.0-2.4, f=21.8-24.0 mm |
| Zoom Ratio | 1.1x manual |
| Keystone Correction | Vertical +/- 30 degrees |
| Image Size (Diagonal) | 40-300 inches |
| Operating Temperature | 5°C to 35°C |
| Included Accessories | Remote control, batteries, power cord, VGA cable, user manual |
| Safety Features | Auto power off, overheat protection, key lock |
| Maintenance | Clean air filter every 100 hours; replace lamp as needed |
Frequently Asked Questions - XR-30X SHARP
How do I turn on the Sharp XR-30X projector?
Press the Power button on the remote control or the main unit. Wait for the lamp to warm up (about 30 seconds).
What is the recommended projection distance for a 100-inch screen?
For a 100-inch diagonal image, place the projector approximately 4 to 4.5 meters away from the screen, depending on zoom setting.
How do I clean the air filter?
Turn off and unplug the projector. Open the filter cover, remove the filter, and wash it with mild soap and water. Let it dry completely before reinstalling. Clean every 100 hours of use.
Can I connect a laptop via HDMI?
Yes, the XR-30X has an HDMI input. Connect your laptop using a standard HDMI cable, then select HDMI as the source.
How do I replace the lamp?
Turn off and unplug the projector. Wait 30 minutes for the lamp to cool. Remove the lamp cover, unscrew the lamp module, and replace with a new Sharp AN-200LP lamp. Reset the lamp timer in the menu.
What does the 'Lamp' indicator mean?
If the Lamp indicator flashes, the lamp may be end of life or not properly installed. Check lamp and replace if necessary. If solid, the lamp is warming up.
Why is the image upside down?
You may have the projector mounted on a ceiling. Go to the menu -> System Settings -> Projection Mode and select 'Ceiling Mount'.
How do I adjust keystone?
Press the Keystone button on the remote. Use the arrow keys to correct vertical distortion up to +/- 30 degrees.
What is the maximum screen size?
The XR-30X can project an image from 40 to 300 inches diagonally. The optimal size depends on room lighting and distance.
How do I reset the lamp timer after replacing the lamp?
Enter the menu, go to Maintenance -> Lamp Timer Reset. Confirm by pressing 'Yes'. This ensures accurate lamp life tracking.
User questions about XR-30X SHARP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual XR-30X - SHARP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XR-30X by SHARP.
USER MANUAL XR-30X SHARP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SHARP
Model : XR-30X
Category : Video projector