ADTV2.1 - Receiver AudioSource - Free user manual and instructions
Find the device manual for free ADTV2.1 AudioSource in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver with 2.1 channel configuration |
| Power Output | 50 watts per channel (8 ohms, 20 Hz - 20 kHz, THD 0.08%) |
| Frequency Response | 20 Hz - 20 kHz (±1 dB) |
| Total Harmonic Distortion | < 0.05% |
| Signal-to-Noise Ratio | 95 dB (A-weighted) |
| Inputs | 3x RCA stereo, 1x Optical, 1x Coaxial, 1x USB (for charging only) |
| Outputs | Speaker outputs (L/R), Subwoofer pre-out, 1/4" headphone jack |
| Dimensions (W x H x D) | 17 x 3.5 x 12 inches (430 x 89 x 305 mm) |
| Weight | 10.5 lbs (4.8 kg) |
| Power Consumption | 250W (standby < 0.5W) |
| Power Supply | 120V AC, 60 Hz (North America) / 230V AC, 50 Hz (selectable via switch) |
| Supported Audio Formats | PCM up to 24-bit/192 kHz, Dolby Digital 2.0 |
| Remote Control | Infrared, included with batteries |
| Protection Features | Short circuit, overheat, and overload protection |
| Cabinet Material | Aluminum front panel, steel chassis |
| Accessories Included | Power cord, remote control, antenna (AM/FM), quick start guide |
| Cleaning Instructions | Disconnect from power, wipe with a soft dry cloth; avoid liquids and abrasives |
| Spare Parts Availability | Contact AudioSource support for replacement parts (e.g., remote, power supply) |
| Repair Information | Refer to user manual; do not attempt internal repairs; contact qualified service |
Frequently Asked Questions - ADTV2.1 AudioSource
How do I connect my TV to the ADTV2.1 receiver?
Use an optical or coaxial digital audio cable from your TV's audio output to the corresponding input on the receiver. Alternatively, use RCA analog cables if your TV has analog outputs.
Can I use this receiver with powered speakers?
The ADTV2.1 is designed for passive speakers. If you use powered speakers, connect them to the Pre-Out subwoofer output (mono) or use the headphone output for line-level, but avoid speaker outputs as they may damage the speakers.
What is the maximum power output per channel?
The receiver delivers 50 watts per channel into 8 ohms, 20 Hz - 20 kHz, with 0.08% THD.
Why is there no sound coming from the speakers?
Check that the receiver is turned on, the correct input is selected, speaker wires are securely connected, and the volume is not at minimum. Also verify that the source device is outputting audio.
How do I reset the receiver to factory settings?
Press and hold the Power button for 10 seconds until the display flashes. Release, and the receiver will reset to default settings.
Can I connect a subwoofer without a dedicated subwoofer output?
Yes, use the Subwoofer Pre-Out on the back. If your subwoofer has only speaker-level inputs, you can connect it in parallel with the main speakers, but ensure impedance is not too low.
What should I do if the receiver overheats?
Turn off the receiver and allow it to cool down. Ensure proper ventilation: keep at least 4 inches of clearance above and around the unit. Reduce volume levels if consistently overheating.
Does the ADTV2.1 support Bluetooth?
No, this model does not have built-in Bluetooth. You can add a Bluetooth adapter via the AUX input.
How do I clean the front panel?
Disconnect from power. Use a soft, dry microfiber cloth. Do not use any cleaning agents or liquids. For stubborn dust, slightly dampen the cloth with water and wipe gently.
Where can I find the user manual?
The manual is available for free download on notice-facile.com or the AudioSource support page in PDF format.
User questions about ADTV2.1 AudioSource
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual ADTV2.1 - AudioSource and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADTV2.1 by AudioSource.
USER MANUAL ADTV2.1 AudioSource
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AudioSource
Model : ADTV2.1
Category : Receiver