SC-CW-04E - Battery charger Scanstrut - Free user manual and instructions
Find the device manual for free SC-CW-04E Scanstrut in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery Charger |
| Brand | Scanstrut |
| Model | SC-CW-04E |
| Input Voltage | 100-240V AC, 50/60Hz |
| Output Voltage | 12V DC |
| Output Current | 4A (total) |
| Number of Outputs | 4 independent channels |
| Dimensions (approx.) | 200 x 150 x 70 mm |
| Weight | 1.2 kg |
| Charging Technology | Multi-stage (bulk, absorption, float) |
| Battery Compatibility | Lead-acid, AGM, gel, wet/flooded |
| Protection Features | Reverse polarity, overcharge, short circuit, overheating |
| LED Indication | Status per channel: charging, fully charged, error |
| Cooling Method | Convection cooling (fanless) |
| Housing Material | Aluminum, corrosion-resistant |
| Mounting | Panel mount or bracket |
| Operating Temperature | -10°C to 50°C |
| Certifications | CE, RoHS |
Frequently Asked Questions - SC-CW-04E Scanstrut
What is the input voltage range for the Scanstrut SC-CW-04E?
The charger accepts 100-240V AC, 50/60Hz, allowing worldwide use.
Can the SC-CW-04E charge all battery types?
It is compatible with lead-acid, AGM, gel, and wet/flooded batteries. Do not use with lithium batteries unless specified.
How many outputs does the charger have?
The SC-CW-04E features 4 independent outputs for charging multiple batteries.
What do the LED indicators mean?
Each channel has a LED: red indicates charging, green indicates fully charged, and flashing indicates an error or fault.
Is the charger waterproof?
It is splash-proof and suitable for marine environments, but not fully submersible. Mount in a dry area.
Can I leave the charger connected permanently?
Yes, it automatically switches to float mode to maintain battery health without overcharging.
What safety protections are included?
The charger includes reverse polarity, overcharge, short circuit, and overheating protection.
How long does it take to charge a battery?
Charging time depends on battery capacity and state of charge. A 50Ah battery takes about 12-15 hours at 4A.
Can I charge different battery types on different outputs?
Yes, each output is independent and can be configured for different battery types.
How to connect the charger?
Connect the output cables to the battery terminals (red to positive, black to negative), then plug the mains cord into AC power.
User questions about SC-CW-04E Scanstrut
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual SC-CW-04E - Scanstrut and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SC-CW-04E by Scanstrut.
USER MANUAL SC-CW-04E Scanstrut
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Scanstrut
Model : SC-CW-04E
Category : Battery charger