CHPA6GTB - Range hood Freggia - Free user manual and instructions
Find the device manual for free CHPA6GTB Freggia in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Chimney hood |
| Brand | Freggia |
| Model | CHPA6GTB |
| Width | 60 cm |
| Height | 60-110 cm (adjustable) |
| Depth | 50 cm |
| Weight | 12 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 200 W |
| Number of Speeds | 3 |
| Extraction Capacity | 650 m³/h |
| Noise Level | 55 dB(A) at max speed |
| Lighting | 2 x 40 W halogen |
| Grease Filter | Aluminium mesh, washable |
| Carbon Filter | Optional, for recirculation mode |
| Control Type | Push buttons |
| Air Discharge | 150 mm diameter (top or rear) |
| Installation | Wall-mounted or recirculation |
| Energy Class | B |
| Annual Energy Consumption | 80 kWh/a |
| Safety Cut-out | Yes |
| Spare Parts Availability | Filters, lamps, motor available |
Frequently Asked Questions - CHPA6GTB Freggia
How do I install the CHPA6GTB range hood?
Refer to the manual for detailed instructions. Typically, you need to mount the hood on the wall at a minimum height of 65 cm above the hob and connect the ducting (if using extraction mode) or install carbon filters for recirculation.
How often should I clean the grease filters?
The aluminium mesh filters should be cleaned every 2-3 months, or more frequently if cooking frequently. Use warm water and mild detergent, or a dishwasher at low temperature. Let them dry completely before reinstalling.
Does this hood support recirculation mode?
Yes, the CHPA6GTB can be used in recirculation mode. You will need to purchase optional carbon filters (model: FCC6) and install them according to the manual. Note that recirculation mode is less effective than ducted extraction.
What is the noise level of the hood?
The noise level is approximately 55 dB(A) at maximum speed. At lower speeds, it is quieter. For reference, 55 dB is comparable to a normal conversation.
Can I adjust the chimney height?
Yes, the telescopic chimney can be adjusted between 60 cm and 110 cm to fit your kitchen ceiling height. Ensure proper fixation to the wall.
How do I replace the light bulbs?
First, disconnect the hood from power. Remove the halogen bulbs (G9 base, 40 W max) by pulling them out gently. Insert new bulbs without touching the glass with bare fingers. Reconnect power.
The hood does not turn on. What could be wrong?
Check the power cord plug, ensure the wall socket is working. Check the fuse/circuit breaker. If still not working, the motor or control board may be defective. Contact customer support.
Can I control the hood remotely?
No, this model does not have remote control capability. It is operated via push buttons on the front panel.
What is the warranty period?
Freggia offers a standard 2-year warranty for manufacturing defects. Proof of purchase is required. For more details, refer to the warranty card included in the box.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the power button for 3 seconds until the indicator light turns off. This resets the timer.
User questions about CHPA6GTB Freggia
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual CHPA6GTB - Freggia and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CHPA6GTB by Freggia.
USER MANUAL CHPA6GTB Freggia
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Freggia
Model : CHPA6GTB
Category : Range hood