NAP-5001 - Uncategorized Naxa - Free user manual and instructions
Find the device manual for free NAP-5001 Naxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | Naxa |
| Model | NAP-5001 |
| Dimensions (Approx.) | 6.3 x 6.3 x 6.3 inches (16 x 16 x 16 cm) |
| Weight (Approx.) | 1.1 lbs (0.5 kg) |
| Power Source | Built-in rechargeable lithium-ion battery, 5V USB charging (cable included) |
| Battery Life (Approx.) | 4-6 hours at moderate volume |
| Charging Time (Approx.) | 2-3 hours |
| Bluetooth Version | Bluetooth 5.0 |
| Wireless Range | Up to 33 ft (10 m) |
| Audio Inputs | Bluetooth, 3.5mm AUX, USB flash drive, microSD/TF card, FM radio |
| Speaker Output (Approx.) | 5W RMS |
| FM Radio | Yes, with built-in antenna |
| Controls | Buttons on unit: Power, Volume, Play/Pause, Next/Previous, Mode |
| Remote Control | Included (infrared) |
| Microphone | Yes, for hands-free calling |
| Display | LED indicator lights for power, Bluetooth, charging, etc. |
| Housing Material | Plastic with fabric grille |
| Water Resistance | Not water-resistant; keep away from liquids |
| Care & Cleaning | Wipe with a soft, dry cloth. Do not use abrasive cleaners. |
| Safety Warnings | Do not disassemble, expose to heat/moisture, or charge unattended. |
| Spare Parts Availability | Spare parts are not sold separately; contact manufacturer for service. |
| Warranty | Limited 1-year warranty |
Frequently Asked Questions - NAP-5001 Naxa
How do I turn on the Naxa NAP-5001?
Press and hold the Power button (located on the top panel) for 2-3 seconds until the LED indicator lights up.
How do I pair my phone via Bluetooth?
Ensure the speaker is on. Press the Mode button to select Bluetooth mode (the LED will flash blue). On your phone, search for 'NAP-5001' and tap to pair. The LED will become solid when connected.
Can I make phone calls with this speaker?
Yes, the speaker has a built-in microphone. Answer incoming calls by pressing the Play/Pause button. Press again to end the call.
How do I charge the battery?
Connect the included USB charging cable to the DC 5V port on the back of the speaker and the other end to a USB power adapter (not included). The LED will turn red while charging and turn off when fully charged.
How long does the battery last?
At moderate volume, the battery lasts approximately 4-6 hours. Battery life may vary depending on volume level and playback source.
How do I play music from a USB flash drive?
Insert a USB flash drive into the USB port. The speaker will automatically switch to USB mode and begin playing MP3 files. Use the Next/Previous buttons to change tracks.
How do I listen to FM radio?
Press the Mode button until the display shows FM mode (or the LED turns green). For best reception, extend the built-in antenna (located near the back) or connect the AUX cable as an antenna. Use the Next/Previous buttons to scan for stations.
Can I use the speaker while it's charging?
Yes, the speaker can be used while connected to a power source. However, charging may take longer during use.
How do I reset the speaker if it freezes?
Locate the small Reset pinhole on the bottom of the speaker (near the model label). Use a paperclip or similar object to press the button inside for 5 seconds. The speaker will power off and reboot.
Is the NAP-5001 waterproof?
No, the NAP-5001 is not waterproof. Keep it away from water, liquids, and high humidity to avoid damage.
User questions about NAP-5001 Naxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual NAP-5001 - Naxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NAP-5001 by Naxa.