Steren

ALA-005 - Alarm system Steren - Free user manual and instructions

Find the device manual for free ALA-005 Steren in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Steren ALA-005 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Alarm System
Brand Steren
Model ALA-005
Dimensions (W x D x H) 12 x 8 x 3 cm
Weight 250 g
Power Supply 12V DC adapter (included)
Backup Battery 9V alkaline battery (not included)
Wireless Range Up to 100 m (open space)
Number of Zones 4
Siren Output 110 dB
Compatible Sensors Magnetic door/window sensors, motion detectors
Operating Temperature -10°C to 50°C
Housing Material ABS plastic
Color White
Certifications CE, FCC
Included Accessories Control panel, power adapter, user manual
Key Functions Arm/disarm via remote, audible alarm, tamper protection
Maintenance Clean with dry cloth; avoid moisture
Repairability Replaceable backup battery; sensors available separately

Frequently Asked Questions - ALA-005 Steren

How do I reset the Steren ALA-005 alarm system?
To reset the system, locate the reset button on the control panel and press it for 5 seconds. This will restore factory settings. Note that all paired sensors and remotes will need to be re-paired.
How to change the backup battery?
Open the battery compartment on the back of the control panel. Remove the old 9V battery and insert a new one, observing polarity. The battery is not included. Use a 9V alkaline battery for best performance.
What sensors are compatible with the ALA-005?
The system works with magnetic door/window sensors and passive infrared motion detectors from Steren. Ensure they operate at the same wireless frequency (typically 433 MHz).
How to pair a new remote or sensor?
Put the control panel in learning mode by pressing the 'Learn' button for 3 seconds. Then activate the remote or sensor (e.g., press button or trigger sensor). The panel will beep to confirm pairing. Repeat for each device.
Why does my alarm go off randomly?
Random alarms may be caused by low backup battery, faulty sensor, or interference. Check the battery level first. Ensure sensors are properly aligned and not exposed to drafts or pets. Relocate the control panel away from large metal objects.
Can I adjust the sensor sensitivity?
Yes, some motion detectors have a sensitivity adjustment screw. For magnetic sensors, reduce the gap between the magnet and sensor. Refer to the specific sensor manual. The control panel does not adjust sensitivity itself.
How to connect multiple sensors to one zone?
You can wire up to two magnetic sensors in series on a single zone using the terminals inside the panel. For wireless sensors, each has its own zone. The ALA-005 supports up to 4 wireless zones.
Is the alarm system weatherproof for outdoor use?
No, the control panel is designed for indoor use only. Sensors such as magnetic contacts can be used on doors, but avoid direct rain or humidity. The housing is not waterproof.
How do I silence a false alarm?
Enter your PIN code or press the 'Arm/Disarm' button on the remote. The siren will stop immediately. If you don't have the remote, press the reset button on the panel with a pointed object.
How can I test if the alarm is working correctly?
Arm the system and then trigger a sensor by opening a door or walking in front of a motion detector. The siren should sound. To test the siren only, press the 'Test' button on the panel. The system will beep and then sound the siren for 3 seconds.

User questions about ALA-005 Steren

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Alarm system in PDF format for free! Find your manual ALA-005 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ALA-005 by Steren.

USER MANUAL ALA-005 Steren

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Steren

Model : ALA-005

Category : Alarm system