FS1806CSL - Saw BLACK & DECKER - Free user manual and instructions
Find the device manual for free FS1806CSL BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Black & Decker |
| Model | FS1806CSL |
| Power | 1800 W |
| Power Supply | Mains 230 V ~ 50 Hz |
| Blade Diameter | 190 mm (7 1/2 inches) |
| Cut Depth at 90° | 65 mm |
| Cut Depth at 45° | 45 mm |
| No-Load Speed | 5500 rpm |
| Bevel Cut | 0° to 45° |
| Weight | 5.2 kg |
| Dimensions (L × W × H) | 400 × 250 × 280 mm |
| Cable Length | 3 m |
| Sound Level | 105 dB(A) |
| Vibration Level | 3.5 m/s² |
| Main Functions | Straight cut, bevel cut, laser guide |
| Maintenance and Cleaning | Clean ventilation slots regularly, replace worn brushes |
| Safety | Anti-restart protection, two-finger switch, blade guard |
| Spare Parts and Repairability | Blade, parallel guide, blade wrench, carbon brushes |
| General Information | Use for wood, panels, plastics; compatible with external extraction |
Frequently Asked Questions - FS1806CSL BLACK & DECKER
How to change the blade of the FS1806CSL circular saw?
Unplug the tool. Use the supplied wrench to lock the shaft and unscrew the center screw. Remove the outer flange and the worn blade. Mount the new blade respecting the rotation direction, replace the flange and tighten the screw.
What is the maximum cutting depth of this saw?
At 90°, the cutting depth is 65 mm; at 45°, it is 45 mm. Adjust the depth by loosening the adjustment lever and sliding the base.
How to adjust the bevel cut?
Unlock the miter adjustment lever, tilt the base to the desired angle (0° to 45°) and lock again. Check the angle with a protractor if necessary.
The saw does not start, what should I do?
Check that the tool is plugged in and the fuse has not blown. Also check the carbon brushes: if they are worn (less than 5 mm), replace them.
How to use the parallel guide?
Insert the guide rod into the holes on the base, set the distance from the blade, tighten the knobs. The guide allows straight and precise cuts.
What are the essential safety instructions?
Always wear safety glasses and gloves. Do not wear loose clothing. Wait for the blade to stop completely before setting down the saw. Use the blade guard.
How to maintain the saw to extend its lifespan?
Clean the ventilation slots regularly with a brush. Check the condition of the carbon brushes every 50 hours of use. Lightly grease the moving parts.
The cut is crooked, why?
Check that the blade is tight and not warped. Make sure the parallel guide is adjusted correctly. Replace the blade if it is dull.
Can I use this saw to cut metal?
Yes, with a blade suitable for metal. Reduce the speed if possible and use a lubricant. Wear reinforced eye protection.
Where to find spare parts for the FS1806CSL model?
You can order blades, carbon brushes and other parts from the official Black & Decker website or from authorized dealers. Use the model number to identify the parts.
User questions about FS1806CSL BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual FS1806CSL - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FS1806CSL by BLACK & DECKER.
USER MANUAL FS1806CSL BLACK & DECKER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BLACK & DECKER
Model : FS1806CSL
Category : Saw