PCL180RS - Saw BLACK & DECKER - Free user manual and instructions
Find the device manual for free PCL180RS BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Reciprocating Saw |
| Brand | Black & Decker |
| Model | PCL180RS |
| Power Source | Cordless, 18V Lithium-Ion Battery |
| Battery Included | Yes (18V MAX Lithium-Ion) |
| Stroke Length | 1-1/8 inches (28.6 mm) |
| No-Load Speed | 0-3000 SPM (Variable Speed Trigger) |
| Weight (with battery) | 6.5 lbs (2.95 kg) |
| Tool Dimensions | 17.5 x 8.5 x 7.5 inches (44.5 x 21.6 x 19.1 cm) |
| Cutting Capacity (Wood) | Up to 6 inches (152 mm) |
| Cutting Capacity (Metal) | Up to 1/4 inch (6 mm) |
| Keyless Blade Change | Yes |
| Orbital Action | No (straight reciprocation) |
| Integrated LED Light | Yes |
| Battery Charger Included | Yes |
| Charging Time | Approximately 1 hour |
| Motor Type | Brushed |
| Recommended Blade Length | 6 to 9 inches (152 to 229 mm) |
| Repairability Index (France) | 7.6/10 |
| Warranty | 2-year limited warranty |
Frequently Asked Questions - PCL180RS BLACK & DECKER
How do I change the blade on the Black & Decker PCL180RS?
To change the blade, first ensure the saw is turned off and the battery removed. Then rotate the blade clamp collar (located near the blade) in the direction of the arrow to release the old blade. Insert the new blade with the teeth facing the correct direction, and release the collar to lock it in place. Always use keyless blade change feature.
What type of battery does the PCL180RS use?
The PCL180RS uses an 18V MAX Lithium-Ion battery, specifically the Black & Decker 18V series (e.g., LBXR20 or LBX20). It is compatible with all Black & Decker 18V MAX tools.
How do I adjust the speed on this reciprocating saw?
The saw features a variable-speed trigger. The speed increases with more trigger pressure, ranging from 0 to 3000 strokes per minute (SPM). This allows you to adjust the cutting speed for different materials.
Can I use this saw for cutting metal?
Yes, the PCL180RS can cut metal up to 1/4 inch (6 mm) thick when using an appropriate metal-cutting blade. For best results, use a bi-metal blade and apply light pressure.
How do I maintain the saw?
Regularly clean the ventilation slots with compressed air to prevent dust buildup. Wipe the housing with a damp cloth; do not use solvents. Inspect the blade clamp for debris. Lubrication is not required as bearings are sealed.
What is the recommended way to store the saw?
Store the saw in a dry place, away from extreme temperatures. Remove the battery when not in use. Keep the blade guard closed (if applicable) or use the blade storage slot on the tool.
The battery doesn't hold a charge. What should I do?
First, try recharging the battery fully (about 1 hour). If it still doesn't work, the battery may be worn out. Check for any visible damage. Black & Decker batteries have a limited lifespan; consider replacing the battery with a new one.
Can I use an extension cord with this cordless tool?
No, the PCL180RS is a cordless tool powered by battery. Do not attempt to connect it to a power cord. Only use the supplied charger for the battery.
How do I clean the saw after use?
Remove the battery. Use a brush or compressed air to remove sawdust from the blade clamp and ventilation vents. Wipe the exterior with a damp cloth. Avoid getting water into the motor.
What is the maximum cutting depth in wood?
With a suitable wood-cutting blade, the saw can cut through wood up to 6 inches (152 mm) thick. For deeper cuts, use a longer blade and adjust the technique.
User questions about PCL180RS BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual PCL180RS - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PCL180RS by BLACK & DECKER.