COMP-80LV - Compressor Truper - Free user manual and instructions
Find the device manual for free COMP-80LV Truper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Compressor |
| Brand | Truper |
| Model | COMP-80LV |
| Tank Capacity | 80 L |
| Max Pressure | 10 bar (145 psi) |
| Motor Power | 2.2 kW (3 HP) |
| Voltage | 230 V / 50 Hz |
| Air Displacement | 400 L/min |
| Sound Level | 85 dB |
| Weight | 70 kg |
| Dimensions (L x W x H) | 1000 x 450 x 800 mm |
| Drive Type | Belt-driven |
| Lubrication | Oil-lubricated |
| Castor Wheels | Yes |
| Safety Valve | Yes |
| Thermal Overload Protection | Yes |
| Oil Change Interval | Every 500 hours |
| Air Outlet Size | 1/4" NPT |
| Start Type | Electric start |
| Duty Cycle | Continuous |
| Included Accessories | Manual, hose connectors |
Frequently Asked Questions - COMP-80LV Truper
How do I start the compressor for the first time?
Check the oil level, ensure the pressure switch is in the OFF position, plug into a grounded outlet, open the drain valve briefly, then close it. Turn the pressure switch ON to start.
What type of oil should I use?
Use a non-detergent compressor oil (ISO 100 or SAE 30). Do not use motor oil or synthetic oils unless specified.
How to adjust the pressure regulator?
Turn the pressure regulator knob clockwise to increase pressure, counterclockwise to decrease. Check the outlet pressure gauge.
Why is the compressor not building pressure?
Possible causes: leak in air tank or fittings, clogged air filter, worn piston rings, or faulty check valve. Inspect and replace as needed.
How often should I drain the tank?
Drain the tank daily after use to remove moisture. Open the drain valve at the bottom until water stops.
What is the maximum safe operating pressure?
The maximum pressure is 10 bar (145 psi). Do not exceed this, as it may cause tank rupture.
How to clean the air filter?
Remove the air filter cover, take out the foam element, wash with warm soapy water, rinse, dry thoroughly, and reinstall. Replace if damaged.
Why does the compressor shut off automatically?
The compressor has a thermal overload protector that shuts off the motor if it overheats. Let it cool for 15 minutes before restarting. Check for ventilation issues.
How to reduce noise?
Place the compressor on a rubber mat to dampen vibration, ensure it is on a level surface, and consider a sound enclosure (do not block ventilation).
What safety precautions should I take?
Always wear safety goggles and hearing protection. Never exceed the rated pressure. Use rated hoses and fittings. Disconnect power before servicing.
User questions about COMP-80LV Truper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual COMP-80LV - Truper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COMP-80LV by Truper.
USER MANUAL COMP-80LV Truper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Truper
Model : COMP-80LV
Category : Compressor