T8DBG49S - Tumble dryer AEG - Free user manual and instructions
Find the device manual for free T8DBG49S AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | AEG |
| Model | T8DBG49S |
| Capacity | 8 kg |
| Drying Technology | Heat Pump |
| Energy Efficiency Class | A++ |
| Dimensions (HxWxD) | 850 x 596 x 638 mm |
| Weight | 48 kg |
| Power Supply | 230 V, 50 Hz |
| Noise Level | 65 dB |
| Sensor Drying | Yes |
| Delay Start | Up to 24 hours |
| Anti-Crease Function | Yes |
| Drum Type | Stainless Steel |
| Filter Cleaning Indicator | Yes |
| Condenser Cleaning | Yes, removable |
| Water Tank Capacity | 4.5 L |
| Child Lock | Yes |
| Warranty | 2 years |
Frequently Asked Questions - T8DBG49S AEG
How do I clean the lint filter on my AEG T8DBG49S?
Open the door and pull the filter upward. Remove lint by hand or with a soft brush. Rinse if necessary and dry before reinserting. Clean after every cycle for optimal efficiency.
What is the maximum load capacity for this dryer?
The maximum load is 8 kg for cotton programs. For synthetics, reduce to 4 kg. Overloading can cause uneven drying and longer cycles.
How do I use the delay start function?
Select a program, then press the Delay Start button repeatedly to set hours (1-24). Press Start. The dryer will begin at the set time.
Why is the drying cycle taking longer than usual?
Possible causes: lint filter clogged, condenser unit blocked, overloaded drum, or low room temperature. Clean the filter and condenser, and reduce load size.
How do I empty the water tank?
Pull out the water tank located at the bottom right. Empty it into a sink. Replace and push back until it clicks. The indicator will turn off.
Can I install this dryer in a small closet?
Yes, but ensure adequate ventilation. Minimum clearance: 50 mm on sides and 100 mm above. Do not block the air outlets.
What does the 'Clean Condenser' message mean?
The condenser unit needs cleaning. Turn off the dryer, open the lower flap, remove the condenser, rinse with warm water, and reinsert. Reset the message by pressing any button.
How do I activate the child lock?
Press and hold the Child Lock button (usually marked with a padlock) for 3 seconds. A symbol appears on the display. Repeat to deactivate.
What is the energy consumption per cycle?
Approximately 1.8 kWh for a full cotton load. Actual consumption varies by program and load. This model is rated A++.
How often should I clean the condenser?
After approximately every 200 cycles, or when the Clean Condenser indicator lights up. Regular cleaning maintains efficiency and prevents faults.
User questions about T8DBG49S AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual T8DBG49S - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. T8DBG49S by AEG.