T8DEA856 - Tumble dryer AEG - Free user manual and instructions
Find the device manual for free T8DEA856 AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heat Pump Tumble Dryer |
| Brand | AEG |
| Model | T8DEA856 |
| Capacity | 8 kg |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Weight | 50 kg |
| Power Supply | 230 V / 50 Hz |
| Energy Class | A++ |
| Noise Level | 65 dB |
| Drying Programs | Cotton, Synthetics, Delicates, Wool, Mix, Rapid, PerfectDry |
| Key Functions | Sensor drying, delay start, child lock, reversible door, anti-crease |
| Heat Pump | Yes, with self-cleaning condenser |
| Condenser Cleaning | Automatic with washable filter |
| Filter Indicator | Yes |
| Water Tank | Internal, easy to empty |
| Child Lock | Yes |
| Reversible Door | Yes |
| Warranty | 2 years |
| Included Accessories | User manual, drain hose if needed |
Frequently Asked Questions - T8DEA856 AEG
How do I clean the filter on my AEG T8DEA856 dryer?
Open the door and pull out the lint filter located at the bottom of the door opening. Rinse it under running water and dry thoroughly before reinserting. For best performance, clean after every load.
How do I empty the water tank?
The water tank is located at the bottom right corner. Pull it out, empty the water, and slide it back in. The indicator will show when it's full. Alternatively, you can connect a drain hose for continuous drainage.
What should I do if my dryer stops mid-cycle?
Check if the water tank is full, the filter is clogged, or the door is open. Also verify that the power cord is plugged in and the circuit breaker is not tripped. If the issue persists, consult the error code display.
What do error codes mean on the AEG T8DEA856?
Common codes include E1 (water tank full), E2 (condenser blocked), E3 (drain blocked), and E4 (heating issue). Refer to the manual for a full list. Many errors can be resolved by cleaning filters or emptying the tank.
Can I dry wool items in this dryer?
Yes, there is a dedicated Wool program designed for machine-washable wool. Use a low heat setting and remove items as soon as the cycle ends to prevent shrinkage.
How should I install the dryer?
Place the dryer on a level, stable surface. Ensure proper ventilation around the appliance. Connect the power cord to a grounded outlet. If using the water tank, ensure it is properly seated. Optionally, install a drain hose for automatic water removal.
How do I use the delay start function?
Select your drying program and press the delay start button. Set the desired delay time (e.g., 1-24 hours) using the +/- buttons. Press start; the dryer will begin after the selected delay. The time remaining will be displayed.
Why are my clothes still wet after a cycle?
Possible causes: overloaded drum, incorrect program selection, clogged filter, or blocked condenser. Ensure you did not exceed 8 kg load, select a suitable program, and clean filters regularly. If problem persists, check for proper airflow.
How do I clean the condenser in this dryer?
The self-cleaning condenser automatically rinses itself during the cycle. However, if you notice reduced performance, manually clean it every 3-6 months. Remove the bottom cover, pull out the condenser unit, and rinse with water. Let it dry before reinserting.
How do I reset the dryer after a malfunction?
Unplug the dryer from the power outlet for about 1 minute, then plug it back in. Press the Start/Pause button again. This often clears temporary errors. If the error persists, consult the manual or contact AEG customer service.
User questions about T8DEA856 AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual T8DEA856 - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. T8DEA856 by AEG.