XDS2000 - Measurement Owon - Free user manual and instructions
Find the device manual for free XDS2000 Owon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Storage Oscilloscope |
| Brand | Owon |
| Model | XDS2000 |
| Bandwidth | 100 MHz - 200 MHz (model dependent) |
| Sampling Rate | 1 GS/s (real-time) |
| Channels | 2 or 4 |
| Display | 7-inch color TFT LCD (800x480) |
| Memory Depth | Up to 40 Mpts per channel |
| Vertical Sensitivity | 2 mV/div to 10 V/div |
| Timebase Range | 2 ns/div to 100 s/div |
| Trigger Types | Edge, Pulse, Video, Slope, etc. |
| Measurement Functions | Vpp, Vrms, Frequency, Period, etc. |
| Connectivity | USB Host, USB Device, LAN (optional) |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Dimensions | Approx. 370 x 180 x 100 mm |
| Weight | Approx. 2.5 kg |
| Safety | Overvoltage Category II; pollution degree 2 |
| Maintenance | Clean with dry cloth; avoid liquids |
| Spare Parts | Probes, power cord, fuse (available from Owon) |
Frequently Asked Questions - XDS2000 Owon
How do I perform an auto setup on the Owon XDS2000?
Press the Auto Set button on the front panel. The oscilloscope will automatically adjust vertical, horizontal, and trigger settings to display the input signal.
What is the maximum input voltage for the XDS2000?
The maximum input voltage is 400 V peak (DC + AC peak) for BNC connectors. Use 10x probes for higher voltages.
How to update the firmware on the Owon XDS2000?
Download the latest firmware from Owon's website, copy it to a USB flash drive, insert into the oscilloscope, and go to Utility > Firmware Update.
Why is the waveform not stable on my XDS2000?
Adjust the trigger level and select an appropriate trigger mode (Edge is common). Ensure the timebase is set correctly for the signal frequency.
Can I measure signals with a DC offset?
Yes, you can use AC coupling to remove the DC component, or set the vertical offset manually using the Position knob.
How do I save a screenshot from the XDS2000?
Press the Print button or go to Utility > Save > Image and save to a USB drive.
What probes are included with the XDS2000?
The oscilloscope comes with two passive 10x/1x probes (100 MHz bandwidth) with compensation adjustment.
How to compensate a probe on the XDS2000?
Connect the probe to the Probe Comp output (1 kHz square wave) and adjust the compensation screw until the square wave appears flat.
Does the XDS2000 support math functions?
Yes, it supports Addition, Subtraction, Multiplication, FFT, and more from the Math menu.
How to reset the Owon XDS2000 to factory defaults?
Go to Utility > System > Factory Default and confirm the reset.
User questions about XDS2000 Owon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual XDS2000 - Owon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XDS2000 by Owon.
USER MANUAL XDS2000 Owon
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Owon
Model : XDS2000
Category : Measurement