RDNE455E20T - Refrigerator BEKO - Free user manual and instructions
Find the device manual for free RDNE455E20T BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Combined Fridge-Freezer |
| Brand | Beko |
| Model | RDNE455E20T |
| Dimensions (H x W x D) | 1850 x 700 x 650 mm |
| Net Weight | 85 kg |
| Energy Class | A++ |
| Total Net Capacity | 475 L |
| Refrigerator Capacity | 340 L |
| Freezer Capacity | 135 L |
| Freezer Star Rating | 3 stars |
| Power Failure Autonomy | 15 h |
| Freezing Capacity | 10 kg/24h |
| Climate Class | SN-T (10°C to 43°C) |
| Noise Level | 42 dB |
| Cooling Technology | No Frost |
| Interior Lighting | LED |
| Special Features | Multi Air Flow, IonGuard, EcoFuzzy |
| Defrost Type | Automatic (No Frost) |
| Shelf Material | Tempered Glass |
| Refrigerant | R600a (isobutane) |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 150 W |
| Door Reversibility | Yes (kit included) |
| Repairability Index | 7.5/10 |
| Maintenance and Cleaning | Clean with a soft cloth and soapy water; do not use abrasive products |
| Warranty | 2 years |
Frequently Asked Questions - RDNE455E20T BEKO
How to set the refrigerator temperature?
You can adjust the temperature via the control panel located inside or on the front. The recommended temperature is 4°C for the refrigerator and -18°C for the freezer. Use the + and - buttons to change the settings.
Why is my Beko RDNE455E20T refrigerator making noise?
Some noise is normal during compressor operation and refrigerant circulation. The noise level is 42 dB. If the noise is excessive, check that the appliance is level and not touching furniture. Refer to the manual for more details.
How to reverse the door opening?
Door reversibility is possible. Refer to the 'Installation' section of the manual to follow the steps. You will need a screwdriver and the provided reversibility kit. Caution: unplug the appliance before any intervention.
What does error code E1 on the display mean?
Code E1 usually indicates a temperature sensor fault. Try unplugging the appliance for 5 minutes and then plugging it back in. If the problem persists, contact after-sales service. Do not attempt to repair it yourself.
How to clean the inside of the refrigerator?
Unplug the appliance, remove food and shelves. Clean with a soft cloth moistened with warm water and white vinegar or mild soap. Rinse with clean water and dry before restarting.
The 'Alarm' light comes on, what should I do?
The alarm light comes on if the internal temperature is too high (after prolonged door opening or placing hot food). The alarm turns off automatically when the temperature returns to normal. If it persists, check the door closure.
Does the freezer need to be defrosted?
No, this model is equipped with No Frost technology which prevents frost formation. No manual defrosting is necessary.
Can I install my refrigerator in an unheated garage?
Yes, the climate class SN-T allows use from 10°C to 43°C. Make sure the ambient temperature does not drop below 10°C to ensure optimal operation.
How to change the charcoal filter (IonGuard)?
The IonGuard filter is usually located in the refrigerator compartment. Remove the cover, replace the used filter with a new one (ref. Beko 2996600100) and close. Replace it every 6 months for maximum efficiency.
What accessories are supplied with the RDNE455E20T?
The appliance comes with glass shelves, a vegetable drawer, an egg tray, an ice cube tray, and a door reversibility kit. Refer to the full list in the manual.
User questions about RDNE455E20T BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Refrigerator in PDF format for free! Find your manual RDNE455E20T - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RDNE455E20T by BEKO.