FLK2AC/90-1000V - Voltage tester FLUKE - Free user manual and instructions
Find the device manual for free FLK2AC/90-1000V FLUKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Non-Contact Voltage Tester |
| Brand | Fluke |
| Model | FLK2AC/90-1000V |
| Voltage Range | 90 V to 1000 V AC |
| Detection Method | Non-Contact (capacitive) |
| Indicators | Audible beeper and LED flashlight |
| Auto Power Off | Yes, after approx. 5 minutes |
| Power Supply | 2 x AAA alkaline batteries (1.5 V) |
| Battery Life | Approx. 300 hours (standby) |
| Dimensions (H x W x D) | 5.4 x 0.9 x 0.9 in (137 x 23 x 23 mm) |
| Weight | 3.6 oz (102 g) including batteries |
| Safety Rating | CAT IV 1000 V, CAT III 1000 V |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Warranty | Limited lifetime (subject to Fluke terms) |
| Included Accessories | Batteries, quick reference guide |
| Maintenance & Cleaning | Wipe with a damp cloth; no solvents |
| Repairability | Non-repairable; replace unit if defective |
Frequently Asked Questions - FLK2AC/90-1000V FLUKE
How does the Fluke FLK2AC/90-1000V detect voltage?
It uses non-contact capacitive sensing. Simply bring the tip near a conductor or insulated wire; the tester will beep and the LED flashlight will illuminate when AC voltage is detected.
What voltage range does this tester cover?
It detects AC voltage from 90 V to 1000 V AC. It is not intended for DC voltage measurement.
Is the FLK2AC suitable for live wire identification?
Yes, it is designed to quickly identify live or energized AC circuits. However, always verify with a known voltage source before relying on it.
What batteries does it use and how do I replace them?
It uses two AAA alkaline batteries (1.5 V). To replace, slide off the battery cover, insert new batteries with correct polarity, and reattach the cover.
How long does the battery last?
Typical standby battery life is about 300 hours. Actual life varies with usage; the auto-off feature helps conserve power.
What safety ratings does the device have?
It is rated CAT IV 1000 V and CAT III 1000 V, making it safe for use on most commercial and industrial circuits.
Can it be used to test outlets and switches?
Yes, you can check if an outlet or switch is live by inserting the tip into the hot slot (smaller slot) or touching the screw terminals. The tester will alert if voltage is present.
Does the tester have an auto-off feature?
Yes, it automatically powers off after approximately 5 minutes of inactivity to preserve battery life.
How should I clean and maintain the tester?
Clean the exterior with a soft cloth dampened with water or mild soap. Do not use solvents or abrasive cleaners. There are no user-serviceable parts inside.
What should I do if the tester doesn't beep when near a known live source?
First, check batteries. If batteries are good, the tester may be defective. Since it is not repairable, contact Fluke for warranty replacement if within the warranty period.
User questions about FLK2AC/90-1000V FLUKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Voltage tester in PDF format for free! Find your manual FLK2AC/90-1000V - FLUKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FLK2AC/90-1000V by FLUKE.
USER MANUAL FLK2AC/90-1000V FLUKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLUKE
Model : FLK2AC/90-1000V
Category : Voltage tester