V3-201 - Ice Maker Vivreau - Free user manual and instructions
Find the device manual for free V3-201 Vivreau in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ice Maker |
| Brand | Vivreau |
| Model | V3-201 |
| Dimensions (W x D x H) | 17.5 x 12.2 x 14.5 in (44.5 x 31 x 37 cm) |
| Weight | 22 lbs (10 kg) |
| Power Supply | 120V / 60 Hz / 150W |
| Ice Production Capacity | Up to 28 lbs (12.7 kg) per 24 hours |
| Ice Storage Capacity | 2.2 lbs (1 kg) |
| Ice Cube Size Options | Small and Large |
| Cycle Time | 6-15 minutes depending on size |
| Water Tank Capacity | 2.1 L |
| Refrigerant | R600a |
| Self-Cleaning Function | Yes |
| Display | LED indicator lights |
| Automatic Shut-off | When ice basket full or water low |
| Ice Scoop Included | Yes |
| Noise Level | < 45 dB |
| Maintenance | Regular descaling with vinegar; clean air filter monthly |
| Safety Features | Overheat protection, low water warning |
| Warranty | 1 year limited |
Frequently Asked Questions - V3-201 Vivreau
How do I start the ice maker for the first time?
Plug in the unit, add water to the tank (up to the MAX mark), press the ON/OFF button, and select ice cube size (S or L). The machine will start producing ice in about 6-15 minutes.
Why is my ice maker not producing ice?
Check that the water tank is filled, the unit is level, and the ice basket is not full. If the low water indicator is on, refill the tank. Also, ensure the ambient temperature is between 50-100°F (10-38°C).
How often should I clean the ice maker?
We recommend cleaning every 1-2 weeks if used daily. Use a solution of white vinegar and water (50/50) to descale, then rinse thoroughly. Also, clean the air filter monthly.
Can I use any type of water?
It is best to use distilled or filtered water to minimize mineral buildup. Tap water may require more frequent descaling.
How do I select ice cube size?
Press the SELECT button on the control panel to toggle between Small (S) and Large (L) ice cubes. The indicator light will show your choice.
What does the 'Add Water' indicator mean?
The Add Water light turns on when the water level is low. Refill the tank up to the MAX line to resume ice production.
Why is the ice cloudy or has an odor?
Cloudy ice is normal due to minerals in water. Odor may occur if the unit is not cleaned regularly. Run a self-clean cycle with vinegar-water solution to eliminate odors.
How do I perform a self-cleaning cycle?
Fill the tank with a vinegar-water solution (50/50), press and hold the ON/OFF button for 5 seconds to start the cleaning cycle (lasts about 30 minutes). After completion, empty and rinse with fresh water.
What should I do if the ice maker is loud?
Ensure the unit is on a level, hard surface. A slight humming or clicking is normal due to refrigerant flow. If excessive noise persists, check for loose parts or contact support.
Can I store the ice maker in a cold place?
The ice maker should be stored in an environment above 32°F (0°C) to prevent water from freezing in the internal lines. If it has been exposed to cold, let it warm to room temperature before use.
User questions about V3-201 Vivreau
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice Maker in PDF format for free! Find your manual V3-201 - Vivreau and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. V3-201 by Vivreau.
USER MANUAL V3-201 Vivreau
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vivreau
Model : V3-201
Category : Ice Maker