Zero 2 - Uncategorized DPW Design - Free user manual and instructions
Find the device manual for free Zero 2 DPW Design in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Eurorack Audio Module |
| Width | 4 HP (20.32 mm) |
| Depth | 30 mm (approx.) |
| Weight | 60 g |
| Power Consumption | +12V: 30 mA, -12V: 20 mA |
| Power Connector | 10-pin Eurorack ribbon cable |
| Input Impedance | 100 kΩ |
| Output Impedance | 1 kΩ |
| Main Function | Signal splitting and buffering |
| Number of Channels | 2 |
| Output Level | 10 Vpp max |
| Frequency Response | 20 Hz – 20 kHz |
| THD+N | <0.01% |
| Construction | PCB with aluminum front panel |
| Operating Temperature | 0°C to 50°C |
| Mounting | Eurorack subrack |
| Compatibility | Doepfer standard |
| Reparability | DIY-friendly, through-hole components |
| Warranty | 1 year limited |
Frequently Asked Questions - Zero 2 DPW Design
What is the DPW Design Zero 2?
The Zero 2 is a passive multiple module for Eurorack synthesizers, providing two channels of signal splitting without amplification.
How many inputs and outputs does it have?
It has 2 inputs and each input is normalized to 3 outputs, giving a total of 6 outputs.
Is the Zero 2 active or passive?
It is passive, meaning it does not require power from the Eurorack bus board, but it can also be powered for buffered operation (check manual).
What cable do I need to connect it?
Use standard 3.5mm mono patch cables. The module accepts all typical Eurorack patch cables.
Can I use the Zero 2 with line-level signals?
Yes, but be aware that passive multiples may cause slight signal loss for long cable runs. For line levels it is generally fine.
Does the Zero 2 come with a power ribbon cable?
No, the Zero 2 does not include a power cable. Use a standard 10-pin to 16-pin ribbon cable if you opt for the powered version.
How do I clean the module?
Use a dry microfiber cloth. Do not use liquids or solvents. Keep the front panel free of dust.
Is the Zero 2 compatible with all Eurorack cases?
Yes, it follows the Doepfer mechanical and electrical specifications, so it fits any standard Eurorack case.
What is the depth of the module?
The module depth is approximately 30 mm, including the power connector.
Can I repair the Zero 2 myself?
Yes, the PCB is DIY-friendly with through-hole components. Replacement parts are available from DPW Design.
User questions about Zero 2 DPW Design
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Zero 2 - DPW Design and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Zero 2 by DPW Design.
USER MANUAL Zero 2 DPW Design
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DPW Design
Model : Zero 2
Category : Uncategorized