SKH-M1JB-R - Lighting PATLITE - Free user manual and instructions
Find the device manual for free SKH-M1JB-R PATLITE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Signal Tower Light (Single-Tier) |
| Model | SKH-M1JB-R |
| Color | Red |
| LED Type | High-intensity red LED |
| Operating Voltage | 24 V DC (typical) |
| Current Consumption | ≤ 0.08 A |
| Protection Rating | IP65 (dust-tight and water-jet resistant) |
| Housing Material | Polycarbonate (UV-resistant) |
| Dimensions (Height × Diameter) | Approx. 64 mm × 60 mm (module only) |
| Weight | Approx. 100 g |
| Mounting | Direct mounting with bracket or pole (optional) |
| Lighting Modes | Steady ON, Flashing (selectable via wiring) |
| Flash Rate | 60 ± 10 flashes per minute (when in flash mode) |
| Wiring | Two-wire connection (positive/negative) for steady; flash mode requires separate wire |
| Operating Temperature | -10 °C to +50 °C |
| Storage Temperature | -20 °C to +60 °C |
| Maintenance | Clean with dry cloth; no user-serviceable parts |
| Compliance | CE, RoHS |
Frequently Asked Questions - SKH-M1JB-R PATLITE
What is the SKH-M1JB-R used for?
The PATLITE SKH-M1JB-R is a single-tier red signal tower light used for visual indication of machine status, alarms, or warnings in industrial environments.
How do I install the SKH-M1JB-R?
Mount the light securely using the provided bracket or an optional pole. Wire the power supply (24V DC) following the wiring diagram: connect the positive and negative wires for steady ON; for flashing mode, connect the flash wire as specified in the manual.
What voltage does the SKH-M1JB-R require?
It operates on 24 V DC, typically with a current draw of ≤ 0.08 A.
Can I use this light outdoors?
Yes, the SKH-M1JB-R has an IP65 protection rating, making it dust-tight and resistant to water jets, suitable for outdoor use.
How do I change the lighting mode?
The mode is set by wiring: for steady ON, connect only the power wires; for flashing, connect an additional flash wire (typically yellow) to a switching output. Refer to the wiring diagram.
What if the light does not turn on?
Check the power supply voltage (24V DC) and wiring connections. Ensure the LED module is properly seated. If still not working, contact PATLITE support.
Can I replace the LED bulb?
No, the LED module is integrated and not user-serviceable. The entire unit should be replaced if the LED fails.
Is the SKH-M1JB-R compatible with other PATLITE modules?
This model is a single-tier unit. It can be stacked with additional SKH modules using a junction box (JB) to create a multi-tier signal tower.
How do I clean the light?
Use a soft, dry cloth to clean the housing. Do not use solvents or abrasive cleaners that may damage the polycarbonate.
What is the warranty for PATLITE products?
PATLITE typically provides a 2-year warranty against manufacturing defects. Check with your supplier for specific terms.
User questions about SKH-M1JB-R PATLITE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual SKH-M1JB-R - PATLITE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SKH-M1JB-R by PATLITE.
USER MANUAL SKH-M1JB-R PATLITE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PATLITE
Model : SKH-M1JB-R
Category : Lighting