Reserve DPA1.2000D - Receiver Soundstream - Free user manual and instructions
Find the device manual for free Reserve DPA1.2000D Soundstream in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Amplifier (Monoblock) |
| Brand | Soundstream |
| Model | Reserve DPA1.2000D |
| Power Output (RMS) | 500W x 1 @ 4Ω, 1000W x 1 @ 2Ω, 2000W x 1 @ 1Ω |
| Power Output (Max) | 2000W |
| Dimensions (W x H x D) | 13.8 x 2.3 x 8.7 inches |
| Weight | 4.5 lbs |
| Power Supply | 12V DC (10-16V) |
| Class Type | Class D |
| Frequency Response | 10Hz - 250Hz |
| Input Sensitivity | 0.2V - 6V |
| Low Pass Filter | 40Hz - 250Hz (variable) |
| Subsonic Filter | 15Hz - 40Hz (variable) |
| Bass Boost | 0-12dB (variable) |
| Protection Features | Thermal, Overload, Short Circuit |
| Cooling | Aluminum heatsink with fins |
| Maintenance & Cleaning | Clean with a dry cloth; avoid moisture and solvents. |
| Safety Instructions | Disconnect battery before installation; use proper gauge wire and fuses. |
| Spare Parts & Repairability | No user-serviceable parts; contact authorized service center. |
| General Information | Marine-grade construction; designed for subwoofer applications. |
Frequently Asked Questions - Reserve DPA1.2000D Soundstream
What is the RMS power output of the Soundstream Reserve DPA1.2000D?
The RMS power output is 500W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms, and 2000W x 1 @ 1 ohm.
What gauge power wire should I use for this amplifier?
It is recommended to use 4 AWG power and ground wire for optimal performance, especially at higher power levels.
Can I bridge this amplifier to run a single subwoofer?
The Reserve DPA1.2000D is a monoblock amplifier and cannot be bridged further. It is designed to power a single subwoofer or a group of subs wired to a single channel.
Does the amplifier have a remote turn-on lead?
Yes, it has a remote turn-on terminal that accepts a 12V signal from the head unit to power on the amplifier.
What is the recommended fuse size for the power supply?
A 200A fuse is recommended for the main power cable. Use an inline fuse holder near the battery.
How do I set the gain on this amplifier?
Set the head unit volume to about 75% of max, then adjust the gain knob until you hear distortion, then back off slightly. Use a multimeter or oscilloscope for precision.
What is the input sensitivity range?
The input sensitivity is adjustable from 0.2V to 6V, allowing compatibility with a wide range of head units.
Does the amplifier have a subsonic filter?
Yes, it features a variable subsonic filter (15Hz - 40Hz) to protect the subwoofer from excessive infrasonic frequencies.
What is the impedance range for stable operation?
The amplifier is stable down to 1 ohm and can handle higher impedances such as 2 or 4 ohms.
Why is there no sound output from the amplifier?
Check the remote turn-on connection, power and ground connections, fuse, and ensure the head unit is sending a signal. Also verify that the gain is not set too low.
User questions about Reserve DPA1.2000D Soundstream
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Reserve DPA1.2000D - Soundstream and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reserve DPA1.2000D by Soundstream.
USER MANUAL Reserve DPA1.2000D Soundstream
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Soundstream
Model : Reserve DPA1.2000D
Category : Receiver