QT130E - Household Fan BROAN - Free user manual and instructions
Find the device manual for free QT130E BROAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ceiling Exhaust Fan |
| Model | QT130E |
| Brand | Broan |
| Airflow | 130 CFM |
| Sound Level | 1.5 Sones |
| Duct Size | 4 inches |
| Recommended Room Size | Up to 105 sq ft |
| Power Supply | 120V AC, 60Hz |
| Current | 0.8 Amps |
| Motor | 120V, Permanently Lubricated |
| Housing Material | Galvanized Steel |
| Grille Material | White Polymeric |
| Dimensions (Housing) | 9.25 x 9.25 x 7.5 inches |
| Weight | 5.5 lbs |
| Mounting | Ceiling |
| Installation Type | New Construction or Retrofit |
| Features | Quiet Operation, Easy Installation |
| Maintenance | Clean Grille and Housing Periodically |
| Safety | Disconnect Power Before Servicing |
| Warranty | 1 Year Limited |
| Compliance | UL Listed, HVI Certified |
| Replacement Parts | Motor, Impeller, Grille Assembly |
| Included Components | Fan, Grille, Mounting Kit, Duct Connector |
Frequently Asked Questions - QT130E BROAN
How do I install the Broan QT130E fan?
Installation requires mounting the housing to ceiling joists, connecting ductwork (4 inch), wiring to 120V power, and attaching the grille. Refer to the manual for step-by-step instructions. Always turn off power at the breaker before installation.
How to clean the QT130E exhaust fan?
Clean the grille and housing with a damp cloth and mild detergent. Do not use abrasive cleaners. Ensure the fan is disconnected from power before cleaning. The motor is permanently lubricated and does not require oiling.
What is the noise level of the Broan QT130E?
The sound level is rated at 1.5 sones, which is very quiet. It is suitable for bathrooms where low noise is desired.
What is the maximum room size for this fan?
The fan is recommended for rooms up to 105 square feet, assuming standard 8-foot ceilings. For larger rooms, consider a higher CFM model.
Can the QT130E be used in a shower area?
Yes, it is UL listed for use in wet locations when properly installed with a GFCI protected circuit. Ensure the fan is rated for damp or wet locations.
How do I replace the motor in my Broan QT130E?
Disconnect power, remove the grille, then unscrew the motor assembly from the housing. Disconnect the wiring and install the new motor (part number 99080474). Reassemble in reverse order.
What is the CFM rating of the QT130E?
The airflow rating is 130 cubic feet per minute (CFM). This is suitable for standard bathrooms.
How do I connect the duct to the fan?
Use 4-inch round ductwork. Attach the duct to the fan's duct connector using duct tape or clamps. Ensure a tight seal to prevent air leaks.
Is the Broan QT130E energy efficient?
The fan is designed for energy-efficient operation. It uses a 120V motor drawing 0.8 amps, resulting in low energy consumption. It is HVI certified for performance.
What is the sones rating and why does it matter?
Sones measure perceived loudness. 1.5 sones is quiet, equivalent to a quiet library. Lower sones means quieter operation, important for comfort in living spaces.
User questions about QT130E BROAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Household Fan in PDF format for free! Find your manual QT130E - BROAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QT130E by BROAN.
USER MANUAL QT130E BROAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BROAN
Model : QT130E
Category : Household Fan