CK10B - Uncategorized Bogen - Free user manual and instructions
Find the device manual for free CK10B Bogen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mixer Amplifier |
| Brand | Bogen |
| Model | CK10B |
| Dimensions (W x H x D) | 19 x 3.5 x 12 inches (rack mountable) |
| Weight | 15 lbs (6.8 kg) |
| Power Supply | 120V AC, 60 Hz |
| Power Output | 100W RMS into 4 ohms |
| Inputs | 2 x XLR/TRS mic/line, 2 x RCA line, 1 x auxiliary |
| Outputs | 4-ohm speaker output, line out, record out |
| Frequency Response | 20 Hz - 20 kHz ±1 dB |
| Controls | Volume, bass, treble, master, page select |
| Indicators | Power, clip, signal presence LEDs |
| Protection | Overload, short circuit, thermal |
| Cooling | Convection, no fan |
| Construction | Steel chassis, rack ears included |
| Operating Temperature | 0°C to 40°C |
| Humidity | 0% to 90% non-condensing |
| Cleaning | Wipe with dry cloth, avoid solvents |
| Safety | Grounded plug, do not expose to moisture |
| Spare Parts | Contact Bogen or authorized dealer |
| Repairability | Service by qualified technician only |
| General Information | Designed for commercial paging and background music |
Frequently Asked Questions - CK10B Bogen
How do I connect a microphone to the CK10B?
Use an XLR cable to connect your microphone to one of the mic/line inputs (channels 1 or 2). Ensure the input switch is set to 'mic' and adjust the gain control accordingly.
What speakers can I use with this amplifier?
The CK10B is rated for 4-ohm speakers. Do not connect speakers with lower impedance than 4 ohms to avoid damage. For 70V systems, use a matching transformer.
How do I reset the amplifier if it shuts off?
If the unit shuts down due to thermal or overload protection, turn off the power, disconnect all inputs/outputs, and let it cool for 10 minutes. Then power on again and reduce the volume.
Can I rack-mount the CK10B?
Yes, the CK10B comes with rack ears and fits a standard 19-inch rack. It occupies 2U (3.5 inches) of rack space.
What is the difference between the line out and record out?
The line out provides a fixed level signal for feeding another amplifier, while the record out is a variable output that follows the master volume, suitable for recording.
How do I adjust the tone controls?
Use the bass and treble knobs on the front panel. Turn clockwise to boost, counterclockwise to cut. The controls affect the overall output.
Can I use the CK10B outdoors?
This amplifier is designed for indoor use only. Do not expose to moisture, rain, or extreme temperatures. Provide adequate ventilation.
What type of power cord does it use?
It uses a standard IEC C13 power cord with a grounded plug. Ensure the outlet is properly grounded.
How do I clean the unit?
Disconnect power and wipe the exterior with a soft dry cloth. Do not use liquid cleaners or abrasive materials. Clean ventilation grills to prevent overheating.
Where can I find the user manual?
The manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by email.
User questions about CK10B Bogen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CK10B - Bogen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CK10B by Bogen.
USER MANUAL CK10B Bogen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bogen
Model : CK10B
Category : Uncategorized