RE84 - Uncategorized Bogen - Free user manual and instructions
Find the device manual for free RE84 Bogen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Amplifier / Receiver |
| Brand | Bogen |
| Model | RE84 |
| Power Output | 60W per channel into 8 ohms |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Input Sensitivity | Line: 200 mV, Mic: 2.5 mV |
| Input Impedance | Line: 47 kΩ, Mic: 600 Ω |
| Output Impedance | 4, 8, 16 ohms |
| Signal-to-Noise Ratio | >90 dB |
| Total Harmonic Distortion | <0.05% |
| Power Supply | 120V AC, 60 Hz (or 230V depending on region) |
| Power Consumption | 200W maximum |
| Dimensions (W x H x D) | 17 x 5.25 x 12 inches (430 x 133 x 305 mm) |
| Weight | 22 lbs (10 kg) |
| Inputs | 2x RCA line, 1x XLR mic, 1x 1/4" mic, 1x phono (MM) |
| Outputs | Speaker terminals, 1x RCA line out, 1x 1/4" headphone |
| Controls | Volume, bass, treble, balance, input selector, power |
| Cooling | Convection (no fan) |
| Operating Temperature | 0°C to 40°C |
| Included Accessories | Power cord, user manual |
| Safety Certifications | UL, CE, RoHS |
| Warranty | 2 years limited |
| Country of Origin | China |
| User Manual Languages | English, French, Spanish, German, Italian |
Frequently Asked Questions - RE84 Bogen
How do I connect my speakers to the RE84?
Connect speaker wires to the speaker terminals on the rear panel. Ensure the impedance matches (4, 8, or 16 ohms) and that the positive and negative terminals are correctly aligned.
Can I use the RE84 with a turntable?
Yes, the RE84 has a dedicated phono input for moving magnet (MM) cartridges. Connect the turntable's RCA cables to the phono input.
What is the power output per channel?
The RE84 delivers 60 watts per channel into 8 ohms, sufficient for most home audio setups.
How do I clean the RE84?
Use a soft, dry cloth to wipe the exterior. Do not use any liquids or abrasive cleaners. Ensure the unit is unplugged before cleaning.
Does the RE84 have a headphone output?
Yes, there is a 1/4-inch headphone jack on the front panel. Inserting headphones will mute the speaker outputs.
What should I do if the unit does not power on?
First, check the power cord connection and ensure the outlet is working. If using a power strip, verify it is switched on. If the issue persists, consult a qualified technician.
Can I bridge the RE84 for more power?
The RE84 is not designed for bridged operation. Using it as a bridged amplifier may damage the unit.
What is the warranty period for the RE84?
Bogen offers a 2-year limited warranty covering defects in materials and workmanship. Retain your purchase receipt for warranty claims.
How do I adjust the bass and treble?
Use the bass and treble knobs on the front panel. Turn clockwise to increase, counterclockwise to decrease. The center position is flat (no boost/cut).
Is the RE84 compatible with 70V systems?
No, the RE84 is designed for low-impedance speakers (4-16 ohms). For 70V systems, use a Bogen commercial amplifier.
User questions about RE84 Bogen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual RE84 - Bogen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RE84 by Bogen.
USER MANUAL RE84 Bogen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bogen
Model : RE84
Category : Uncategorized