FMH15T - Uncategorized Bogen - Free user manual and instructions
Find the device manual for free FMH15T Bogen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Audio Amplifier |
| Model | FMH15T |
| Brand | Bogen |
| Power Output | 15 Watts RMS |
| Inputs | 1 x Microphone (balanced), 1 x Line (aux) input |
| Outputs | Speaker output (4-16 Ω), 70V/100V line output |
| Frequency Response | 50 Hz - 18 kHz |
| Signal-to-Noise Ratio | >70 dB |
| Dimensions (W x H x D) | 430 x 88 x 280 mm (approximately) |
| Weight | 5.5 kg (approximately) |
| Power Supply | 120 V AC, 60 Hz |
| Protection | Overload, short circuit, thermal protection |
| Maintenance | Wipe with dry cloth; disconnect power before cleaning |
| Safety Compliance | UL, CE, RoHS |
| Indoor Use Only | Yes |
Frequently Asked Questions - FMH15T Bogen
How do I connect a microphone to the FMH15T?
Use a balanced XLR cable to connect your microphone to the Mic Input jack. Ensure the microphone is dynamic or powered if it requires phantom power.
Can I connect the amplifier to a 70V speaker system?
Yes, the FMH15T supports 70V/100V line outputs. Connect the speaker to the 70V or 100V terminal as labeled on the rear panel.
What is the maximum speaker impedance I can use?
For standard speaker outputs, use speakers with an impedance between 4 and 16 Ω. For 70V lines, follow the total wattage not exceeding the amplifier's 15W rating.
How do I adjust the volume?
Turn the Volume knob on the front panel. For remote control, you may connect an external volume control accessory (optional).
The amplifier has no power. What should I check?
Ensure the power cord is securely plugged into a working outlet. Check the power switch on the front panel and confirm the fuse is intact (located on the rear panel).
Can I use this amplifier outdoors?
No, the FMH15T is designed for indoor use only. Keep it in a dry, ventilated area away from moisture and dust.
How do I clean the amplifier?
Disconnect power. Use a soft, dry cloth to wipe the surface. Do not use liquids or abrasive cleaners.
Is the FMH15T compatible with Bluetooth?
No, the FMH15T does not have built-in Bluetooth. You can connect an external Bluetooth receiver to the line input.
What are the dimensions of the amplifier?
Approximately 430 mm wide, 88 mm high, 280 mm deep. It fits a standard 19-inch rack mount (ears included).
Where can I find replacement parts?
Contact Bogen technical support or authorized distributors for replacement parts. Many components are proprietary and may require professional service.
User questions about FMH15T Bogen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FMH15T - Bogen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FMH15T by Bogen.