DS1650 - Heating Escea - Free user manual and instructions
Find the device manual for free DS1650 Escea in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Fireplace |
| Model | DS1650 |
| Brand | Escea |
| Fuel Type | Natural Gas or Propane |
| Ignition System | Electronic Direct Ignition |
| Thermostat Control | Remote Control Included |
| Heating Capacity | Up to 65,000 BTU/h |
| Efficiency | Up to 85% AFUE |
| Venting Type | Direct Vent (Coaxial) |
| Dimensions (W x H x D) | 1650mm x 600mm x 500mm (approximately) |
| Weight | Approximately 90 kg |
| Power Supply | 240V AC / 50Hz, < 2A |
| Safety Features | Flame failure safety device, overheat protection, child lock |
| Glass Front | Ceramic glass, self-cleaning |
| Maintenance | Annual professional inspection recommended, clean glass regularly |
| Spare Parts Availability | Authorized dealers and online catalog |
| Warranty | Standard 2 years, limited lifetime on combustion chamber |
| Remote Control Range | Up to 10 meters |
| Log Set Style | Contemporary ceramic fiber logs |
| Certification | AGA, CGA, or CSA approved (depending on market) |
Frequently Asked Questions - DS1650 Escea
What type of gas does the Escea DS1650 use?
The DS1650 can be configured for natural gas or propane. Check the rating plate on your unit to confirm the fuel type.
How do I operate the remote control for the DS1650?
Point the remote at the fireplace receiver. Press the ON/OFF button to toggle the flame. Use the UP/DOWN buttons to adjust the thermostat or flame height (if equipped).
What are the clearance requirements for the DS1650?
Maintain minimum clearances as per the installation manual: typically 36 inches (914 mm) from the front and 12 inches (305 mm) from sides and back to combustible materials. Always follow local codes.
Why does my DS1650 turn off unexpectedly?
Common causes include blocked venting, low gas pressure, or a faulty thermocouple. Check the flame sensor and ensure the thermocouple is clean. If the issue persists, contact a qualified technician.
How often should I clean the glass on my Escea fireplace?
Clean the ceramic glass when cool using a mild glass cleaner and a soft cloth. Avoid abrasive materials. Frequency depends on usage, but every 1-2 months is typical.
Can the DS1650 be installed in a bedroom?
Yes, the DS1650 is a sealed combustion fireplace and can be installed in bedrooms. However, check local building codes and ensure proper venting to the outside.
What is the expected lifespan of the Escea DS1650?
With proper maintenance, the DS1650 can last 15-25 years. Key components like the burner and heat exchanger may require replacement sooner.
How do I reset the DS1650 after a power outage?
Simply turn the fireplace off using the remote or wall switch, wait 5 seconds, and turn it back on. The electronic ignition will restart automatically.
Does the DS1650 require a dedicated electrical circuit?
Yes, a dedicated 240V/15A circuit is recommended for the fireplace and its accessories. Grounding is essential.
Where can I find replacement parts for the DS1650?
Contact an authorized Escea dealer or visit the Escea website for genuine spare parts. Use only approved parts to maintain safety and warranty.
User questions about DS1650 Escea
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual DS1650 - Escea and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS1650 by Escea.
USER MANUAL DS1650 Escea
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Escea
Model : DS1650
Category : Heating