4414-230-3 - Pump Perlick - Free user manual and instructions
Find the device manual for free 4414-230-3 Perlick in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pump for beverage dispensing |
| Brand | Perlick |
| Model | 4414-230-3 |
| Dimensions (H x W x D) | Approx. 15 x 10 x 10 inches |
| Weight | Approx. 8 lbs |
| Power Supply | 230 V, 50/60 Hz |
| Max Flow Rate | 3-5 gallons per minute |
| Material | Stainless steel and food-grade plastic |
| Primary Function | Transfer of beverages from keg to tap |
| Maintenance | Regular cleaning of internal parts with mild detergent |
| Cleaning | Disassemble and rinse with warm water; avoid abrasive cleaners |
| Safety Features | Thermal overload protection |
| Spare Parts Available | Seals, valves, and motor assembly |
| Repairability | Modular design; replacement parts easily accessible |
| Operating Temperature | 32°F to 100°F |
| Compatible with | Standard soda kegs and beer kegs |
| Noise Level | < 70 dB |
Frequently Asked Questions - 4414-230-3 Perlick
How do I install the Perlick 4414-230-3 pump?
Connect the pump to a 230V outlet. Attach the inlet hose to the keg coupler and outlet hose to the tap. Prime the pump by letting liquid flow before use.
Can I use this pump for liquids other than beer?
Yes, it is suitable for most non-carbonated and carbonated beverages. Ensure the liquid is not corrosive to the pump materials.
How do I clean the pump?
Disconnect power, disassemble the pump head, and rinse all parts with warm water and mild detergent. Avoid harsh chemicals. Dry completely before reassembly.
What type of maintenance does the pump require?
Regularly check seals and valves for wear. Lubricate O-rings with food-grade lubricant. Clean after each use to prevent clogging.
The pump is not starting. What could be wrong?
Check power supply and ensure the pump is properly connected. Verify that the thermal overload has not tripped. If the motor is humming but not running, the impeller may be stuck.
Can I repair the pump myself?
Basic maintenance and part replacement (seals, valves) can be done by the user. For motor or electrical issues, contact Perlick support or a qualified technician.
Where can I buy spare parts?
Spare parts such as seals, impellers, and motor assemblies are available from Perlick authorized dealers or online retailers.
What is the maximum flow rate of this pump?
The maximum flow rate is approximately 3-5 gallons per minute, depending on liquid viscosity and head pressure.
Is the pump compatible with home keg systems?
Yes, it is designed for both commercial and home use. It works with standard ball-lock or pin-lock keg couplers.
Does the pump have any safety features?
Yes, it includes thermal overload protection to prevent motor damage from overheating.
User questions about 4414-230-3 Perlick
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual 4414-230-3 - Perlick and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 4414-230-3 by Perlick.
USER MANUAL 4414-230-3 Perlick
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Perlick
Model : 4414-230-3
Category : Pump