GB1 - Pump Perlick - Free user manual and instructions
Find the device manual for free GB1 Perlick in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pump |
| Brand | Perlick |
| Model | GB1 |
| Category | Beverage Pump |
| Dimensions (W x D x H) | 200 mm x 150 mm x 300 mm |
| Weight | 5 kg |
| Power Supply | 120 V AC, 60 Hz |
| Motor Type | Induction motor |
| Max Flow Rate | 3 GPM (11.4 L/min) |
| Max Head Pressure | 30 psi (2.1 bar) |
| Compatible Liquids | Beer, wine, soda, water (low carbonation) |
| Material | Stainless steel and food-grade polymer |
| Hose Connection | 3/8" barbed fittings |
| Cleaning | Disassemble and hand wash with warm soapy water |
| Maintenance | Regular inspection of seals and impeller |
| Safety Features | Thermal overload protection, splash-proof housing |
| Warranty | 1 year limited warranty |
| Included Accessories | Power cord, user manual, mounting bracket |
Frequently Asked Questions - GB1 Perlick
How do I install the Perlick GB1 pump?
Mount the pump on a stable surface using the included bracket. Connect the inlet and outlet hoses using 3/8" barbed fittings. Ensure the pump is electrically grounded before plugging into a 120V outlet.
What types of beverages can I pump with the GB1?
The GB1 is designed for low-carbonation beverages such as beer, wine, and soda. It is not suitable for high-viscosity liquids or liquids with pulp.
How should I clean the pump?
Disconnect power and disassemble the pump head. Wash all parts with warm soapy water, rinse thoroughly, and allow to dry completely before reassembling. Do not use abrasive cleaners.
What if the pump is not priming?
Ensure the inlet hose is submerged in liquid and the pump is filled with liquid before starting. Check for air leaks at hose connections. If the problem persists, inspect the impeller for blockages.
Can I use the pump with glycol for cooling?
Yes, the GB1 can handle glycol mixtures used in beverage cooling systems. However, ensure the glycol is compatible with food-grade polymers.
What is the maximum height the pump can push liquid?
The pump can achieve a maximum head pressure of 30 psi, which equates to a vertical lift of approximately 70 feet (21 meters) under ideal conditions.
Is the pump noisy during operation?
The induction motor operates quietly, typically below 50 dB. If excessive noise occurs, check for cavitation or loose mounting.
Where can I find replacement parts for the GB1?
Replacement parts such as seals, impellers, and power cords are available through Perlick authorized dealers or online parts retailers.
Can I use the pump continuously?
The pump is rated for intermittent duty. For continuous operation, limit run time to 30 minutes followed by a 15-minute cool-down period.
What should I do if the pump motor overheats?
The thermal overload protection will automatically shut off the motor. Allow the pump to cool for 30 minutes, then reset by unplugging and plugging back in. Check for blockages that may have caused the overheat.
User questions about GB1 Perlick
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual GB1 - Perlick and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GB1 by Perlick.