MAXinBOX 16 v3 - Home Automation Zennio - Free user manual and instructions
Find the device manual for free MAXinBOX 16 v3 Zennio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | KNX 16-channel Switching Actuator |
| Dimensions (mm) | 144 x 90 x 64 (4 modules DIN rail) |
| Weight | Approx. 180 g |
| Power Supply | KNX bus voltage (29V DC SELV) |
| Main Functions | Control of 16 independent loads (lights, blinds, heating, etc.) with manual override, status indication, scene and logic functions via KNX bus |
| Maintenance | Cleaning with dry, soft cloth; avoid liquids and solvents |
| Safety | Complies with KNX standards; reinforced isolation between bus and load circuits; suitable for DIN rail mounting in distribution boards |
| Spare Parts & Repairability | No user-serviceable parts; only qualified electrician to replace; spare unit available from Zennio distributors |
| General Information | Firmware upgradeable via ETS; integrated in KNX building automation systems |
Frequently Asked Questions - MAXinBOX 16 v3 Zennio
Can the MAXinBOX 16 v3 control both lights and blinds?
Yes, each of the 16 channels can be configured as binary output (e.g., lights) or as a motorized load (e.g., blinds, curtains) using the KNX ETS software.
What is the maximum switching current per channel?
Typical rating is 16A per channel for resistive loads, 10A for inductive loads. Check manual for exact derating.
Does it support manual override?
Yes, there are manual push buttons on the front for local toggling per channel, even without bus voltage.
How is the device powered?
It is powered exclusively via the KNX bus (29V DC SELV). No external power supply is needed for the electronic part. Switching power for loads comes from the mains.
Can it be used with other KNX devices?
Absolutely, it is fully KNX-compatible and can interact with any KNX sensors, actuators, and controllers via the bus.
What are the dimensions and mounting type?
It has a width of 4 DIN modules (approx. 72mm) and mounts on a standard DIN rail in a distribution board.
Is firmware upgrade possible?
Yes, the firmware can be updated via the KNX bus using ETS and a suitable interface.
What certifications does it have?
It is KNX certified and complies with CE, RoHS, and relevant EU directives.
How many scenes can I configure?
The number of scenes depends on the application program loaded via ETS; typical programs support up to 64 scenes with multiple channels each.
Does it have a status LED indicator?
Yes, each channel has a red/green LED indicating relay state and channel programming mode.
User questions about MAXinBOX 16 v3 Zennio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Home Automation in PDF format for free! Find your manual MAXinBOX 16 v3 - Zennio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MAXinBOX 16 v3 by Zennio.
USER MANUAL MAXinBOX 16 v3 Zennio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Zennio
Model : MAXinBOX 16 v3
Category : Home Automation