Z35 v2 - Uncategorized Zennio - Free user manual and instructions
Find the device manual for free Z35 v2 Zennio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | KNX room temperature controller / actuator |
| Dimensions | 71 x 71 x 35 mm (flush-mounting) |
| Weight | Approx. 0.1 kg |
| Power Supply | Via KNX bus (24 V DC, typical <10 mA) |
| Main Functions | Temperature measurement, setpoint adjustment, HVAC control, KNX communication, integrated display (if applicable) |
| Maintenance & Cleaning | Clean with a dry, soft cloth; do not use abrasive cleaners or solvents |
| Safety | CE marked; installation by qualified electrician only; comply with local electrical regulations |
| Spare Parts & Repairability | No user-serviceable parts; contact manufacturer for repairs |
| General Information | For indoor use only; operating temperature 0-40°C; IP20 rated |
Frequently Asked Questions - Z35 v2 Zennio
How do I install the Z35 v2?
Installation must be carried out by a qualified electrician. The device is flush-mounted in a standard 71mm junction box and connected to the KNX bus. Refer to the manual for wiring diagrams.
Can I use the Z35 v2 with other KNX devices?
Yes, the Z35 v2 is fully KNX-compliant and can be integrated into any KNX system. It communicates via the KNX bus protocol.
How do I configure the temperature setpoint?
The setpoint can be adjusted via the physical buttons on the device or remotely through KNX commands. Detailed programming steps are in the manual.
What should I do if the display is not working?
Check the KNX bus connection and ensure the device is powered. If the issue persists, contact technical support as there are no user-serviceable components.
Is the Z35 v2 compatible with Zigbee or Wi-Fi?
No, the Z35 v2 is a KNX-only device. It does not support Zigbee or Wi-Fi. For wireless integration, use a KNX IP gateway.
What is the accuracy of the temperature sensor?
The built-in sensor has a typical accuracy of ±0.5°C at 25°C. Calibration may be possible via the programming software.
Can I mount the Z35 v2 outdoors?
No, the device is rated IP20 and intended for indoor use only. Exposure to moisture or extreme temperatures can damage it.
How do I reset the device to factory settings?
Press and hold the programming button (if available) for 5 seconds, or use the KNX software to perform a factory reset. Refer to the manual.
Does the Z35 v2 support HVAC control?
Yes, it can control heating, cooling, and ventilation systems via KNX actuators. Configure parameters in the ETS software.
Where can I download the latest firmware?
Firmware updates are available on the Zennio website. Use the KNX programming tool to upload the new firmware via the bus.
User questions about Z35 v2 Zennio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Z35 v2 - Zennio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Z35 v2 by Zennio.
USER MANUAL Z35 v2 Zennio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Zennio
Model : Z35 v2
Category : Uncategorized