Crestron

ZUMLINK-US-QUATTRO-DLS-RLY - Motion detector Crestron - Free user manual and instructions

Find the device manual for free ZUMLINK-US-QUATTRO-DLS-RLY Crestron in PDF.

📄 291 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Crestron ZUMLINK-US-QUATTRO-DLS-RLY - page 8
8 / 291
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Motion Detector
Brand Crestron
Model ZUMLINK-US-QUATTRO-DLS-RLY
Detection Technology Passive Infrared (PIR)
Dimensions (H x W x D) 4.5 in x 4.5 in x 1.5 in (114 mm x 114 mm x 38 mm)
Weight 0.3 lb (136 g)
Power Supply 24 VDC, 30 mA
Detection Range Up to 30 ft (9.1 m) at 90°
Output Dry contact relay, normally open/closed
Mounting Type Ceiling or wall mount (included hardware)
Coverage Area Up to 200 sq ft (18.6 m²)
Operating Temperature 32°F to 104°F (0°C to 40°C)
Humidity 5% to 95% non-condensing
Primary Functions Occupancy detection for lighting and HVAC control
Adjustable Settings Time delay, sensitivity, and daylight threshold
LED Indicator Red LED for detection status
Compliance UL, cUL, FCC
Spare Parts Mounting bracket accessory (sold separately)
Repairability Not user-serviceable; replacement recommended
Maintenance Clean lens with soft dry cloth; avoid chemicals
Safety Install per local codes; disconnect power before wiring
General Information Compatible with Crestron control systems

Frequently Asked Questions - ZUMLINK-US-QUATTRO-DLS-RLY Crestron

What is the mounting height for the ZUMLINK-US-QUATTRO-DLS-RLY?
For optimal performance, mount the detector at a height of 7.5 to 8 ft (2.3 to 2.4 m) on a wall or ceiling.
How do I adjust the sensitivity of the motion detector?
Use the onboard potentiometer or software settings via Crestron system to adjust sensitivity from low to high.
Can the detector be used outdoors?
No, it is designed for indoor use only. Exposure to moisture or extreme temperatures may damage it.
What is the maximum load for the relay output?
The relay can switch up to 1A at 24 VAC/VDC resistive load.
How do I reset the detector to factory defaults?
Press and hold the reset button for 5 seconds using a paperclip; this clears all custom settings.
Is the detector compatible with third-party control systems?
It is optimized for Crestron systems, but the dry contact relay can be used with any low-voltage controller.
What is the detection pattern of the PIR sensor?
The sensor has a 90° conical detection pattern with a range of up to 30 ft.
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with water. Do not use solvents or abrasive cleaners.
What does the red LED indicate?
The LED blinks when motion is detected. It can be disabled via the settings if desired.
Can I use this detector in a bathroom?
Yes, it is suitable for indoor bathrooms as long as it is not exposed to direct spray or steam.

User questions about ZUMLINK-US-QUATTRO-DLS-RLY Crestron

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Motion detector in PDF format for free! Find your manual ZUMLINK-US-QUATTRO-DLS-RLY - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZUMLINK-US-QUATTRO-DLS-RLY by Crestron.

USER MANUAL ZUMLINK-US-QUATTRO-DLS-RLY Crestron

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Crestron

Model : ZUMLINK-US-QUATTRO-DLS-RLY

Category : Motion detector